Advertisement
How to operate the warm temperature to my mode.
Use it while opening the lid when there is much water or rice becomes too soft.
Press "Warm/Reheat" button in my mode.
(Refer to page 15) The display of mark will
change with a buzzer
mark is first mark.
1. When opening the lid, if too much water is spilt :
2. If the edge of rice is too soft :
How to keep warm during sleep
When keeping the rice warm for long time, set up the temperature low to prevent the following quality of rice:
smell, dry, change of color; from PM10:00 ~ AM 04:00.
How to set up
1. In the custom-made rice taste function, press the "Warm/Reheat" button. The custom-made
warming mode will be entered. At the same time, press the preset button. The display will
indicate as below.
2. When entering the custom-made warming mode in bed, press the "Hrs/SOAK" button.
display will be corrected and press the My Mode function to set up.
3. After entering the custom-made warming mode, if you do not press the any other buttons
within 7 seconds, the function will return to the previous cancelled function.
4. This function must be activated the buyer depending in necessity.
How to release
1. In the My Mode function, press the "Keep Warm/Reheat" button. The custom-made
warming mode will be entered. At the same time, press the preset button. The display will
be shown as below.
2. When entering the custom-made warming mode in bed, press the "Min/HEAT" button.
display will blink and then press the custom-made rice taste function to relase.
3. After entering the custom-made warming mode in bed, press the "Cancel" button or do not
press any button for 7 seconds, then function will go back to the prior cancelled function.
If you need to keep the rice warm during sleeping, do not use this function. This function makes
the rice cooler than normal. In summer, the rice can be spoiled and may smell because of high
temperature. If possible, do not use the custom-made warming mode while sleeping.
Press Hrs/SOAK button to raise the setting mode about 1~2 step.
Press button Min/Heat to reduce the setting mode about 1~2 step.
-1 Press "Hrs/SOAK" button to change the
display as
Select the menu you want, then the press the
"My Mode" button and set-up time will be
automatically entered with a buzzer.
(If you press the cancel button or do not press
a button within 7 seconds, the function will be
cancelled and return to standby mode.)
-2 Press "Min/HEAT" button to change the
display as
Advertisement
