Safe Mode; Base Unit Only; Reset Default Settings - Scalextric digital ADVANCED 6 CAR POWERBASE Instruction Manual

6_car_powerbase_instructions:Layout 1 26/01/2010 11:48 Page 12
ENGLISH
7.2 ("dEFAU") Reset
Default Settings
7.3 ("DIG'L") Digital
Select digital mode

Safe Mode

Upon track overload or short circuit, the power base is protected with
an automatic power cut-off within the power base circuitry. This is
indicated by flashing lights on the power base and 'SAFE' displayed
on the screen.
After the track overload or short circuit condition is cleared, press
and release the ENTER button to release the system from
SAFE mode and return to the previous operation screen.
12
q
i
dEFAU
q
i
t u
no/YES
ENTER
PLAtF
q
i
DIG'L
ENTER

BASE UNIT ONLY

To use base unit without LCD allows you to race 6 cars

RESET DEFAULT SETTINGS

ENGLISH
Set Car ID
1 Place car on the track
2 Press/hold Enter –
Green LED flashes
3 Push brake button –
Red & Green LED flash
Repeat process one
car on track at a
time per controller
13