Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for ALDI Workzone Titanium+ 52299
- Page 1 User Manual 52299 3500W INVERTER GENERATOR WITH PURE SINE WAVE Product Info www.powertoolsupport.com Read all safety warnings and all instructions thoroughly before operating this product. Ensure you keep your manual in a safe place for future reference. IM ed13...
- Page 2 Try it out now Just scan the QR code with your smartphone and Product find out more about the Aldi product you have Info purchased*. * Depending on your tariff you may be charged for the connection.
-
Page 3: Table Of Contents
Contents Pack contents / parts Intended use of the 3500W Inverter Generator with Pure Sine Wave Contents of carton Description of symbols General safety warnings Additional Safety Rules for Petrol Products Risk of electrocution and fire Risk of fire Risk of injury and property damage when transporting generator Risk of breathing –... -
Page 4: Pack Contents / Parts
3500W Digital Inverter with Pure Sine Wave Pack contents / parts Congratulations on the purchase of your Workzone® Titanium 3500W Inverter Generator with Pure Sine Wave. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified. -
Page 5: Description Of Symbols
Description of symbols The rating plate on your Inverter Generator may show symbols. These represent important information about the product or instructions on its use. Conforms to relevant standards for electrical safety and electromagnetic compatibility. Wear hearing protection. Wear eye protection. Wear breathing protection. -
Page 6: General Safety Warnings
General safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in fire and/or serious injury. The word power tool used in the following warnings and throughout this manual refers to petrol driven power tools and Generators. This unit may not be used by people (including children) with reduced physical, sensory or mental capacities, with a lack of experience and without the appropriate knowledge, unless they are supervised by someone who is responsible for their... - Page 7 c. Prevent unintentional starting. Ensure the switch is in the “off” position when starting, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d.
-
Page 8: Additional Safety Rules For Petrol Products
Additional Safety Rules for Petrol Products Additional safety rules for Generators • T he generator is supplied with lifting handles on each side of the generator, and when lifting, two operators should lift the generator together. • T he generator can also be fitted with wheels, and if these are fitted, the generator can be moved with the additional front lifting handle by one person. - Page 9 Additional Safety Rules for Petrol Products • l ocate the generator for use in a convenient place so as to use the shortest extension lead as possible, but still sufficiently away from the exhaust fumes. • e nsure the generator has oil. Before commencing the generator, ensure that the unit has been filled with SAE 10W-30 4 stroke oil. • a ny extension cable should be of heavy duty, 3 core and rated to 15a, and suitable for outdoor applications.
-
Page 10: Risk Of Electrocution And Fire
3500W Digital Inverter with Pure Sine Wave Risk of electrocution and fire Hazard What could happen How to prevent it Improper storage of extension cord. Extension cord can come into contact Remove extension cord from the with hot engine parts resulting in generator and store separately away damage. -
Page 11: Risk Of Fire
3500W Digital Inverter with Pure Sine Wave Risk of fire Hazard What could happen How to prevent it Attempting to fill the fuel Fuel and fuel vapours can become ignited Turn engine off and allow it to cool before tank while the engine is by coming in contact with hot components adding fuel to the tank. -
Page 12: Risk Of Injury And Property Damage When Transporting Generator
3500W Digital Inverter with Pure Sine Wave Risk of injury and property damage when transporting generator Hazard What could happen How to prevent it Fire, inhalation, damage Fuel or oil can leak or spill and The generator is equipped with a fuel drain valve, to vehicle surfaces could result in fire or breathing turn the valve to the off position before transporting to... -
Page 13: Risk Of Hot Surfaces
3500W Digital Inverter with Pure Sine Wave Risk of hot surfaces Hazard What could happen How to prevent it Contact with hot engine and Contact with hot surfaces, such as During operation, touch only the generator components. engines exhaust components, could control surfaces of the generator. -
Page 14: Parts List
Parts List 3500W Digital Inverter with Pure Sine Wave Parts List 18. Recoil starter 19. Choke lever Fuel tank 20. Air filter cover Fuel tank cap 21. Air Filter Wheel foot 22. Spark plug lead / cover On/Off switch 23. Spark Plug Side carry handles (2) 24. - Page 15 Parts List 3500W Digital Inverter with Pure Sine Wave AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. INF3800A • 03/2016 • 52299...
-
Page 16: Inverter Technology
Inverter technology 3500W Digital Inverter with Pure Sine Wave Inverter technology This generator has been developed with inverter technology providing regulated, clean and “pure” electricity for a continuous uninterrupted stable power supply. Inverter technology provides confidence as a power source for camping applications, outdoor lights, sound systems, televisions, microwaves and power tools. -
Page 17: Assembly / Compact Stand Alone Assembly
General Assembly 3500W Digital Inverter with Pure Sine Wave Assembly This generator has been designed to be used as a stand alone / compact generator or a larger Threaded wheel portable / wheeled type generator. foot hole Compact Stand Alone Assembly Assembly of the Feet NOTE: These 4 feet (28) can be fitted even if the generator will be fitted with the wheeled option. -
Page 18: Portable Wheeled Typed Generator Assembly
General Assembly 3500W Digital Inverter with Pure Sine Wave 3. With the supplied 10mm tube spanner (30) still holding the hex head screw securely in place, apply the flat washer, spring washer, then the nut to the top of the hex head screw and tighten in a clockwise direction using the supplied multi-size spanner (33) (Fig E). -
Page 19: Assembly Of The Main Carry Handle
General Assembly 3500W Digital Inverter with Pure Sine Wave Following assembly of the wheels, it is recommended to assemble the additional wheel foot (3) for stability and to keep the generator on a level surface. 1. Raise the opposite end of the generator that the wheels have been assembled on by placing a wooden block (or something similar) underneath the bracket that the feet have been assembled on... -
Page 20: Indicators
Indicators 3500W Digital Inverter with Pure Sine Wave Indicators This generator has three main LED indicators to indicate to the operator various conditions as follows: 1. Low oil indicator (Fig L) The low oil indicator light (7) is a yellow LED and will illuminate when the oil level of the generator is too low. -
Page 21: Preparing The Generator
General Assembly 3500W Digital Inverter with Pure Sine Wave 3. Power Supply indicator (Fig N) The power supply indicator light (9) is a green LED. It will only display green when there is a 240V output available, thus the generator must be operating. This indicator will remain on when the generator is operating and has 240Va.c. -
Page 22: Checking The Engine Oil
Engine Oil 3500W Digital Inverter with Pure Sine Wave • c heck to ensure that the fuel drain (34) has been tightened and that fuel is not leaking. • B e careful not to admit dust, dirt, water or other foreign objects into the fuel. • Wipe off spilt fuel thoroughly before starting engine. • e nsure you Do noT fuel the generator in close proximity to any open flames, lit cigarettes, or hot objects. • T he generator should also be located in an open area with fresh air and noT in a confined area. WARNING: Ensure the engine is switched off while undertaking this task. -
Page 23: Engine Oil Replacement
Engine Oil 3500W Digital Inverter with Pure Sine Wave 3. If the oil level is close to or below the lower level line, refill with 4 stroke oil to the upper level line (Fig O). Do not use the generator when the oil level is close to the low level. Fill the oil tank before use each time. -
Page 24: Starting The Engine
Starting/Stopping the Engine 3500W Digital Inverter with Pure Sine Wave Starting the Engine NOTE: before starting the engine, ensure you have filled the oil tank to the correct level with oil and fuel has been added to the fuel tank. NOTE: The oil tank is NOT filled with oil from the factory. -
Page 25: Stopping The Engine
Starting/Stopping the Engine 3500W Digital Inverter with Pure Sine Wave Stopping the Engine 1. before stopping, ensure that no electrical apparatus is electrically connected to the generator . TURN OFF the master 240Va.c switch (13) to turn off the power to the 3 AC sockets (12). You can also then remove any plugs in any of the 3 AC sockets (12) on the control panel (14) (Fig Q/R). -
Page 26: 240V Ac Connection
Operation 3500W Digital Inverter with Pure Sine Wave 240V AC Connection This generator provides a clean digital output suitable for most electrical appliance/s including televisions, computers, laptops, caravans etc. It comes fitted with 3 x 240V AC outlets, giving you the ability to run 3 x electrical appliances at the one time, as long as the combination of the maximum rating of each appliance does not exceed the maximum rated power of the generator. -
Page 27: Overload Condition
Operation 3500W Digital Inverter with Pure Sine Wave • i nsert the 3 pin plug of the appliance/s into the 240V ac outlet socket/s (12) of the generator (Fig. x). • T urn on the master 240Va.c switch (13) so 240Va.c. power is available to the 3 AC output sockets (12). The connected individual appliances can now be switched on. WARNING. Prior to connecting any appliance to the generator, check the rating label of the appliance. -
Page 28: Periodic Maintenance
Maintenance 3500W Digital Inverter with Pure Sine Wave Periodic Maintenance Periodic maintenance Item Remarks Pre-operation Initial 1 Every 3 Every 6 Every 12 check (daily) months months months months or 300Hr or 20Hr or 50Hr or 100Hr Spark plug Check condition, adjust gap and •... -
Page 29: Generator Maintenance
Maintenance 3500W Digital Inverter with Pure Sine Wave Generator Maintenance Your generator should be kept clean and dry at all times. The generator should not be stored or operated in environments that includes excessive moisture, dust or any corrosive vapours. If these substances are on the generator, clean with a cloth or soft bristle brush. -
Page 30: Spark Plug
Maintenance 3500W Digital Inverter with Pure Sine Wave Spark Plug To ensure the engine is operating correctly, the spark plug must be properly gapped and free of carbon deposits. Always check the spark plug cable is firmly fitted to the top of the spark plug. WARNING: Ensure the engine is switched off while undertaking this task. -
Page 31: Air Filter
Maintenance 3500W Digital Inverter with Pure Sine Wave Air Filter It is very important to maintain an air filter (21) in proper condition. Damage to the generator may arise if the filter has: • improperly been serviced. • D irt and other foreign elements adhering to the filter due to improper installation and engine wear. It is recommended the air filter (21) is cleaned every 50 hours (every 10 hours under dusty conditions). -
Page 32: Fuel Tank Filter
Maintenance 3500W Digital Inverter with Pure Sine Wave Fuel Tank Inlet Filter WARNING: Ensure the engine is switched off while undertaking this task. 1. Turn the fuel tap/ lever (26) to the ‘off’ position (Fig AC). 3. The fuel tank inlet filter (27) is located directly under the fuel tank cap (2) and protects impurities entering the fuel tank (1) during refuelling. -
Page 33: Tap Outlet Fuel Filter
Maintenance 3500W Digital Inverter with Pure Sine Wave Tap Outlet Fuel Filter WARNING: Ensure the engine is switched off while undertaking this task. NOTE: The following procedure should be performed in a well ventilated area, with no naked flames, sparks, or cigarettes. NOTE: Safety glasses should also be worn and on/off switch (4) set to the OFF position. -
Page 34: Cleaning
Cleaning/Warranty/Service 3500W Digital Inverter with Pure Sine Wave Cleaning 1. Keep your machine clean. The outside of the machine can be cleaned using a damp soft cloth with a mild detergent if required. Never use water to clean the generator as it may cause damage to internal parts. 2. -
Page 35: Environmental Protection
Cleaning/Warranty/Service 3500W Digital Inverter with Pure Sine Wave Environmental protection Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way. Dispose of used motor oil in a manner that is compatible with the environment. -
Page 36: Troubleshooting
Troubleshooting 3500W Digital Inverter with Pure Sine Wave Trouble Possible cause Suggested remedy Engine will not start 1. Low on fuel or oil content 1a Fully fill tank. Ensure fuel is fresh 1b Ensure oil is at the the correct level. Refer page 20-21 of this manual. -
Page 37: Specifications
Specifications 3500W Digital Inverter with Pure Sine Wave Specifications AC output: 240Vac ~ 50Hz Rated power: 3200W Peak power: 3500W Phase: Single Power factor: cosφ =1 Displacement: 182cc Motor: 4 stroke No load speed: 3000 RPM Approximate Generator Run time: (Hours per full tank) Full Load: 5.5 Hours... - Page 38 ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store, within 60 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.