1. Manuals
  2. Brands
  3. Home Improvement Products Manuals
  4. Garbage Disposal
  5. ECO CRUSH 400
  6. Operation and instruction manual

Home Improvement Products ECO CRUSH 400 Operation And Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

ECO CRUSH 400
OPERATION AND INSTRUCTIONS MANUAL
NOTE：This Food Waste Disposer has been designed to operate with your appropriate
household current exclusively. Using any other voltage or Hz adversely affects performance.
IMPORTANT： Read all instructions thoroughly. Keep this guide for reference.
CAUTION： Be sure to review INSTRUCTIONS PERTAINING TO A RISK OR FIRE,ELECTRIC
SHOCK OR INJURY TO PERSON before using disposer. ,
RECORD IMPORTANT DISPOSER INFORMATION HERE
Model Number：
*Above information appears on the label affixed to bottom of the disposer. For your convenience, write
down the model and serial number prior to installation.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances, basic precautions should always be followed,
including the following:
1. Read all instructions before using the appliance.
2. To reduce the risk of injury, close supervision is necessary when an appliance is used near
children.
3. Do not put fingers or hands into a waste disposer.
4.Turn the power switch to the off position before attempting to clear a jam or remove an object from
the disposer, and pull out the plug.
5. When attempting to loosen a jam in a waste disposer, use a long wooden object such as a wooden
spoon or the wooden handle of a broom or mop.
6. When attempting to remove objects from a waste disposer use long-handled tongs or pliers.
7. To reduce the risk of injury by materials that may be expelled by a waste disposer, do not put the
following into a disposer: caustic drain cleaners or similar products; glass, china or plastic; large whole
bones; metal, such as bottle caps, tin cans, aluminum foil or utensils; hot grease or other hot liquids.
8. When not operating a disposer, leave the stopper in place to reduce the risk of objects falling into
the disposer.
9. DO NOT operate disposer unless splash guard is in place.
10. For proper grounding instructions see the ELECTRICAL CONNECTION portion of this manual.
11. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or
authorized person in order to avoid hazard.
FOOD WASTE DISPOSER
Serial Number：

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO CRUSH 400 and is the answer not in the manual?

Questions and answers

Summary of Contents for Home Improvement Products ECO CRUSH 400

  • Page 1 ECO CRUSH 400 FOOD WASTE DISPOSER OPERATION AND INSTRUCTIONS MANUAL NOTE：This Food Waste Disposer has been designed to operate with your appropriate household current exclusively. Using any other voltage or Hz adversely affects performance. IMPORTANT： Read all instructions thoroughly. Keep this guide for reference.
  • Page 2 1. REMOVAL OF OLD UNIT TYPICAL INSTRUCTIONS, YOUR MODEL MAY VARY. NOTE: If you have no existing unit to remove, simply take out you waste (plug) and proceed to Section 2 Before starting this step, turn off electrical power at the circuit breaker or fuse box. Unplug disposer.

  • Page 3: Installation Of Mounting Assembly

    2. INSTALLATION OF MOUNTING ASSEMBLY PLEASE READ COMPLETELY BEFORE STARTING NOTE: Pay close attention to the order of mount assembly parts, as they have been correctly assembled by the factory (see 3A). Also, reference the cushion mount detail in illustration 3G for the proper position of the cushion mount.
  • Page 4 SUPPORT RING (ARROWS POINTING UP) IMPORTANT NOTICE: CUSHION MOUNT DETAIL When the cushion mount is installed correctly, the lip of the sink flange fits into the groove on the inside of the cushion mount and mount ring can be pulled downward over cushion mount and will be free to rotate.

  • Page 5: Attaching Discharge Elbow

    3. ATTACHING DISCHARGE ELBOW A. Connect waste disposal elbow to the disposer (see 5A), - Please note the direction of the gasket before removal. - Remove the rubber gasket - Fit the mounting over the elbow - Replace the gasket the correct way as removed - Secure the elbow to the disposer and secure it using the screws provided.

  • Page 6: Dishwasher Connection

    5. DISHWASHER CONNECTION If you are utilizing a dishwasher, complete the following procedure A. Using a blunt instrument (steel punch or wooden dowel), knock out entire plug (see 2A). Do not use a screwdriver or sharp instrument. (When knockout plug falls into disposer, you may remove it or grind it up when the disposer is used) This will not damage the disposer in any way, but may take some time to grind.

  • Page 7: Tips For Successful Operation

    7. OPERATING INSTRUCTIONS The Anti-Jam Swivel Impellers make a clicking sound as they initially swing into place. This indicates normal operation. A. Remove sink stopper. Turn on a medium flow of cold water. B. Turn switch to ON position;, or push your air switch button. Your motor is turning at full speed and ready to use.

  • Page 8: 11. Troubleshooting

    10. TYPICAL INSTALLATIONS ECO CRUSH 400 11. TROUBLESHOOTING Before seeking repair, we recommend that you review the following: LOUD NOISES: (Other than those during grinding of small bones and fruit pits): These are usually caused by accidental entry of a spoon, bottle cap or other foreign object. To correct this, turn off electrical switch and water.
  • Page 9 11. AIR SWITCH INSTRUCTIONS The Disposer Air Switch Assembly is supplied in three basic parts: The Actuator which consists of: 1. Actuator Button 2. Actuator Nut 3. Actuator Outlet(Black Threaded portion) The Air Switch Sensor is installed into disposer. Only the air tube nozzle is visible from the outside of the disposer.

Table of Contents