Table of Contents
Advertisement
11-2. Assembly
1
1)Set KEYPAD on the FRONT
.Check the KEYPAD's guide hole
1) Join safely so that the hole in the keypad
may come in contact touch each other to front.
3
1)Assemble REAR and FRONT ass'y.
1) Take care so that it may not happen that
scratch gets taken in organization.
2) Check all of hooks are correctly jointed.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
2
1)Put the MIC into a hole of REAR.
2)Set a PBA on the FRONT.
1) Take care so that dust may not ask to LCD.
2) Take care so that MIC F-PCB may not be
cracked.
4
DONE
1) Take care so that it may not happen that
scratch gets taken in organization.
2) There is no screws.
11-2
Advertisement
Table of Contents
