Advertisement
Focus: Tap to adjusting the camera focus. (iOS: Slide the bar to left to focus near,
and slide to right to focus far).
Iris+ / Iris-: Tap to widen or narrow down the IRIS opening.
Preset: The function is used to force camera to turn to the preconfigured preset
position. Tap the Preset button to bring up the Preset setting page. Enter a
Preset number and then tap Go to go to the Preset camera view, tap Set to set
the camera preset position, or tap Delete to delete the camera preset position.
Auto Pan: Tap to force the camera to pan 360°endlessly.
Pattern: Tap to move the camera in a pattern mode (The pattern mode is the
Pattern "1" configured in EverFocus PTZ cameras).
Tour: Tap to move the camera in a tour mode (The tour mode is the Tour "1"
configured in EverFocus PTZ cameras).
Menu: Tap the Menu button on the PTZ panel to bring up the OSD menu on the
screen. You can use the Up and Down arrow icons on the screen to select
among each menu item, tap the Right arrow icon to enter the selected menu
item, and tap Left arrow icon to return to the previous page. (Analog PTZ
camera only).
Gesture Controls:
You can swipe to change the directions, pinch to zoom out,
and spread to zoom in on "single" division screen / full screen.
-10-
Advertisement
