Makita BO5020 Instruction Manual page 6

Speed adjusting dial
For BO5021 only
The tool speed can be infinitely adjusted between 4,000 opm and 12,000 opm by turning
the speed adjusting dial, which is marked
1
to 5. Higher speed is obtained when the dial is
turned in the direction of number 5; lower speed is obtained when it is turned in the direc-
tion of number 1. Refer to the figure below for the relationship between the number set-
tings on the adjusting dial and the kind of work.
-
0 range
I
range
j
,
A
range: For polishing
B range: For finish sanding
C
range: For regular sanding
NOTE:
The above figure shows standard applications. They may differ under certain conditions.
6