Samsung BD-J5700 User Manual page 13

Configuring your Network
Connection
Before you begin, contact your ISP to find
out if your IP address is static or dynamic.
If it is dynamic, and you have a wired or
wireless network, we recommend using
the Automatic configuration procedures
described below.
If you are connecting to a wired network,
connect the player to your router
using a LAN cable before you start the
configuration procedure.
If you are connecting to a wireless
network, disconnect any wired network
connection before you begin.
To begin configuring your network
connection, follow these steps:
Wired Network
Wired - Automatic
Ğ
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the
v button.
3. Select Network Settings, and then
press the v button.
4. Select Wired in the Network
Settings screen, and then press the
v button.
5. Select Connect button, and then
press the v button. The product
detects the wired connection,
verifies the network connection and
then connects to the network.
Wired - Manual
Ğ
If you have a static IP address or the
Automatic procedure does not work,
you'll need to set the Network Settings
values manually.
Follow Steps 1 and 2 in Wired -
Automatic, and then follow these steps:
1. Select Network Status. The player
searches for a network, and then
displays the connection failed
message.
2. On the bottom of the screen, select
Ip Settings, and then press the v
button.
The IP Settings screen appears.
3. Select the IP Setting field, and then
press the v button.
4. Select Enter manually in the IP
Setting field, and then press the v
button.
5. Select a value to enter (Ip Address,
for example), and then press the v
button.
Use the number keypad on your
remote control to enter the numbers for
the value. Use the ◄► buttons on the
remote control to move from entry field
to entry field within a value. When done
with one value, press the v button.
6. Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 5.
7. Repeat Steps 5 and 6 until you have
filled in all values.
NOTES
✎
You can get the Network values from your
`
Internet provider.
8. When finished entering all the
values, and then press the RETURN
or ExIT buttons. The player verifies
the network connection and then
connects to the network.
Wireless Network
You can setup a wireless network
connection in four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices
currently connected through the player
or, if applicable, the player's current wired
connection, will be disconnected.
Wireless - Automatic
Ğ
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the
v button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network
Settings screen, and then press the
v button. The player searches
for and then displays a list of the
available networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
Add Network
You can connect your Blu-ray
player to the internet. Please
select which wireless network
to use.
WPS(PBC) Search
m Move " Select ' Return
5. Select the desired network, and then
press the v button.
6. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting a
letter with an arrow button, and then
pressing v button.
7. When done, select done and then
press the v button. The player
verifies the network connection and
then connects to the network.
8. When verification is complete, select
OK, and then press the v button.
NOTES
✎
You should be able to find the Security Code or
`
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
Ğ
If you have a static IP address or the
Automatic procedure does not work,
you'll need to set the Network Settings
values manually.
1. Follow the directions in Wireless -
Automatic through Step 5.
13