Table of Contents
Advertisement
ABS1500 1500RPM
INTRODUCTION
This operator's book has important information for the
use and safe operation of this machine. Read this book
carefully before starting the machine. Keep this book
and tell all operators to read the book. If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.
For new books write to:
Thoro-Matic
2259 South Sheridan Road
Muskegon, MI 49442
Carefully inspect all components to ensure that there is
no concealed freight damage. If such damage is dis-
covered, file a "CONCEALED DAMAGE REPORT" im-
mediately with the delivering carrier.
UHS BURNISHER
OPERATING & MAINTENANCE
READ THIS BOOK
The contents of this manual are based on the latest
product information available at the time of publication.
Thoro-Matic reserves the right to make changes or im-
provements to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER _________________________
DATE PURCHASED ____________________
INSTRUCTIONS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Thoro-Matic ABS1500
- Page 1 Keep this book Thoro-Matic reserves the right to make changes or im- and tell all operators to read the book. If you do not provements to its machines without notice.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To assure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1. - Page 3 OPERATING PROCEDURES WARNING! For the safe operation of this machine OPERATION follow the instructions given in this booklet and the training given by your supervisor. Failure to Set the machine upright onto the pad. Plug the do so can result in personal injury and/or damage machine’s power cable into a properly grounded outlet to machine and property! (see Safety Instructions).
- Page 4 ABS1500 1500RPM BURNISHER 515904 - Pad Assembly, Flex Drive...
- Page 5 ABS1500 1500RPM BURNISHER PARTS LISTS ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. W323D Screw, 6-32x1 Pan Hd. 502319 Cover-Bearing, Plastic 980016 Washer, #6 Ext. Tooth 502481 Collar, Upper Shaft 500801 Bracket, Switch Mounting 507780 Drive Shaft 911135...
-
Page 6: Wiring Diagram
505286 MOTOR PARTS LIST ITEM PART NO. DESCRIPTION QTY. 505286 Motor 115V, 1.5HP 502919 End Bell - Motor LOWER 500417 Armature Asm.w/Bearings,115V 902012 Bearing, Motor Lower 503117 Field & Shell Assembly 902003 Bearing, Motor Top 500903 Carbon Brush, Motor 115V 507322 Brush Ring Asm. - Page 7 NOTES...
- Page 8 The inoperative machine or warranted parts must be delivered to the authorized service center with shipping and delivery charges prepaid. If unable to locate a service center, you may contact Thoro-Matic at the address listed herein for the location of the nearest repair center or agent or for other instructions pertaining to your warranty difficulty.
Need help?
Do you have a question about the ABS1500 and is the answer not in the manual?
Questions and answers