Advertisement
Quick Links
40mm
250mm
STEP 1
One hole
TWO holes
4x M2 x 25 Socket Screw
1x M2.5 x 25 Socket Screw
M2.5 x 25 Socket Screw
SIGMA HEXA-600C User Manual
How to assemble
SIGMA HEXA-600C
SIGMA HEXA-600C
Read the manual carefully before using SIGMA HEXA-600C
88mm
420mm
Not use
Note the direction of this gap
288mm
305mm
6 sets complete
Note the direction
Version 1.1
578mm
325mm
All screw need to use screw
glue for higher intensity
Back View
M2 x 25 Socket Screw
19mm
Page 1
Advertisement
Summary of Contents for Sigma HEXA-600C
- Page 1 Version 1.1 How to assemble SIGMA HEXA-600C SIGMA HEXA-600C Read the manual carefully before using SIGMA HEXA-600C 288mm 40mm 578mm 88mm 305mm 325mm 250mm 420mm STEP 1 All screw need to use screw One hole glue for higher intensity TWO holes...
- Page 2 M2.5 x 25Socket Screw M2.5 x 25 Socket Screw STEP 3 Device Mounting Plate Use Nylon Screw (M3 x 15) HEAD Direction ( + Mode) Battery Mounting Plate Use Nylon Screw (M3 x 40) SIGMA HEXA-600C User Manual Page 2...
- Page 3 STEP 4 Install Lower Plate Complete Note the direction STEP 5 Complete Prepare the parts M2 x 12 Screw M2 x 14 Screw SIGMA HEXA-600C User Manual Page 3...
- Page 4 You need to install the 4 sets aluminum column on the frame. Shown above is one of them. HEAD Direction( + Mode) HEAD Direction(X Mode) Aluminum column install here(cross this hole) Aluminum column install here(cross this hole) STEP 7 M3 x 6 Socket Screw SIGMA HEXA-600C User Manual Page 4...
- Page 5 STEP 8 M3 x 12 Socket Screw Complete Aluminum column install here(cross this hole) 97mm 97mm M3 x 12 Socket Screw 73mm Wrap with tape is recommend Approx: 150mm SIGMA HEXA-600C User Manual Page 5...
- Page 6 This gimbal is a professional level camera housing with 5: 1 tilt, 10: 1 reduction on roll for very fine and smooth gyro stabilization directly off the flight controller of your SIGMA HEXA-600C. It is precision engineered and well designed and crafted it is primarily constructed from lightweight alloys and machined engineering plastics.
- Page 7 M3 x 12 Socket Screw M3 Socket Screw (Prepare by yourself) Complete Nylon Nut (M3 x 6) SIGMA HEXA-600C User Manual Page 7...
- Page 8 Total: 380g Total: 460g With AV200 Total: 1080g With AV200+5DII Total: 2460g SIGMA HEXA-600C User Manual Page 8...
- Page 9 SIGMA FC3X-360CM Multirotor 3-Axis Carbon Fiber DSLR Gimbal SIGMA FC3X-360CM 3-axis camera mount is specially designed for SIGMA HEXA-600C aircraft and XAircraft X650V4/V8, made by carbon fiber material, having structure of high structural strength, light weight. It is capable of installing DSLR and most of DV. The 3-axis includes Tilt, Roll and horizental(Pan), wherein the direction axes can rotate in unlimited 360 degrees, the rotation speed and direction are controlled by radio set.
Need help?
Do you have a question about the HEXA-600C and is the answer not in the manual?
Questions and answers