Advertisement
Quick Links
Handheld Laser Distance Meter
5040B,5060B,5080B,5100B
User Manual
Thank you for purchasing our handheld laser distance meter.
Please carefully read this user manual and follow the instructions below.
Warning:
1. Before using this product, please read the safety precautions and
instructions carefully. Failure to follow the instructions mentioned in the user
manual may cause damages to this instrument, affect the measurement
accuracy or even physically harm the user or anyone else.
2. Do not try to disassemble or repair the instrument by yourself, especially
the laser transmitter part which is highly sensitive. Take a good care of your
instrument and don't place it anywhere within the children's reach. This
instrument is preferred to be used by professionals only.
3. Never point the laser beam at yourself or someone else, especially in the
eye. Of course, don't stare at the laser beam either
4. Don't point this laser device at highly-reflective object.
5. The electromagnetic radiation from this laser device may interfere with
other instrument nearby such as a pacemaker and hearing aid.
6. Don't use this laser device in an inflammable and explosive environment.
7. Dispose the broken instrument and used batteries properly and discreetly.
Don't mix them up with other normal household garbage. Follow the related
government regulations during disposal.
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for HoldPeak 5040B
- Page 1 Handheld Laser Distance Meter 5040B,5060B,5080B,5100B User Manual Thank you for purchasing our handheld laser distance meter. Please carefully read this user manual and follow the instructions below. Warning: 1. Before using this product, please read the safety precautions and instructions carefully. Failure to follow the instructions mentioned in the user manual may cause damages to this instrument, affect the measurement accuracy or even physically harm the user or anyone else.
- Page 2 Overview: Keyboard: 1. Power On/Single Measurement/Consecutive Measurements Button 2. Add Button 3. Subtraction Button 4. Area/Volume Calculation Button 5. Backlight/Point of Reference Switch Button 6. Pythagorean Proposition Indirect Measurement Button 7. Unit Switch Button 8. Record-view Button 9. Clear/Power Off Button Screen: Laser beam indicator Point of Reference indicator...
- Page 3 OD Outdoor Mode: After the device is turned on, long press the Area/Volume Calculation Button for 3 seconds to temporarily activate or deactivate OD Outdoor Mode. It returns to default setting after the device is turned off. Inserting/Replacing Batteries Open the battery compartment and insert the batteries in it and then shut the compartment with the lid.
- Page 4 When battery is low， a battery indicator icon will be displayed on the screen to remind you to replace the batteries. ·Pay attention to the polarity symbols marked inside of the compartment. · Only 1.5V AAA alkaline battery is allowed. ·Remove the batteries if you are not going to use the instrument in a long time(to avoid leak of erosive chemical substance from the batteries).
-
Page 5: Start Menu
Start，Menu Turn on/ Turn off Instrument Turn on: Press the ON/MEAS Button to turn on the device. Turn off：Long press the Clear Off Button to turn off the device. Clear Off Button Press the “Clear Off” Button to delete the latest measurement. For indirect measurement,（such as Area/Volume measurement）, you can delete the measurements one by one and measure them again. - Page 6 0.000m 0.000m2 0.000m3 0.00m 0.000m2 0.000m3 0.00ft 0.00ft2 0.00ft3 0.0in 0.00ft 0.00ft3 Point of reference setting The default point of reference of this meter is its bottom. Press the Point of Reference Button to switch the point of reference between its bottom and head.
- Page 7 Add/Subtract Functions： After single measurements，you can add/subtract 2 measurements First, take a measurement, then press the “Add” Button ，a symbol“+” will appear in the primary display area which means the instrument has entered the Accumulation Mode. Take another measurement, then the summation of the last 2 measurements will be displayed on the screen.
- Page 8 Volume Measurement Press the “Area/Volume” button twice, a symbol will appear on the screen which stands for volume, while one side of it keeps blinking. Follow the instructions below： Press the “Power on/Measure” button to measure the 1st blinking side（Length） Press the “Power on/Measure”...
- Page 9 Press the “Power on/Measure” button to measure the hypotenuse （a）. Press the “Power on/Measure” button again to measure the blinking straight flange（b）. The meter will automatically work out the height of the 2nd straight flange （x）. 2》 Press this button twice，...
- Page 10 3》Press this button three times，a symbol will appear on the screen with its hypotenuse blinking. Press the “Power on/Measure” button to measure this blinking hypotenuse（a）. Press the “Power on/Measure” button again to measure the 2nd blinking hypotenuse in the middle（b）. Press the “Power on/Measure”...
- Page 11 For this Pythagorean Proposition Indirect Measurement， the straight flange has to be shorter than the hypotenuse in the same triangle，otherwise the meter is unable to do the calculation and an “Error” message will appear on the screen. In order to guarantee the accuracy，please make sure to take all these measurements from the same point and measure the hypotenuse，straight flange in sequence.
- Page 12 After the device entering the Measurement mode under Laying Off mode, the supplementary display area displays the distance(1) between the measuring target and the closest point where the first object should be laid. The primary display area displays the distance(2) between the device itself and this closest point.
- Page 13 Technical Parameters: Model Number HP-5040B HP-5060B HP-5080B HP-5100B Max. Measuring 100m Distance Accuracy ±1.5mm(± 0.06 in) Units mm/in/ft Laser Type Class 2 635nm，<lm W Consecutive Measurements Area Measurement Volume Measurement Pythagorean Proposition Indirect Measurement Add/Subtract functions Max/Min Measurement Display Backlight...
- Page 14 Unfavorable conditions such as strong sunlight, highly-reflective or low-reflective object may affect the accuracy of the measurements to a large extent. Use a reflective board to make the measurements more accurate when the sunlight is poor or the object is inadequately reflective. Appendix Error Codes Code...
- Page 15 1141 Budapest, Fogarasi út 77. 1095 Budapest, Mester utca 34. Tel.: *220-7940, 220-7814, 220-7959, Tel.: *218-5542, 215-9771, 215-7550, 220-8881, 364-3428 Fax: 220-7940 216-7017, 216-7018 Fax: 218-5542 Mobil: 30 531-5454, 30 939-9989 Mobil: 30 940-1970, 20 949-2688 www.holdpeak.hu E-mail: info@delton.hu Web: www.delton.hu...
Need help?
Do you have a question about the 5040B and is the answer not in the manual?
Questions and answers