Cleaning And Maintenance; Specification - Beldray EH0197WK Instruction Manual

Press the oscillation switch to rotate the heater from side to side.
Note: Ensure that the heater has sufficient room to oscillate and that flammable materials are
kept at least one metre away from the heater at all times.
If you need to change the position of the heater, switch it off, disconnect it from the mains
power supply and wait for it to cool. Only attempt to move the heater by the handle at the rear
and ensure that there is sufficient cable length available.
After use, switch the heater off and unplug it from the mains power supply.

Cleaning and Maintenance

Before attempting any cleaning or maintenance, ensure that the heater is unplugged from the
mains power supply.
Make sure that the heater has thoroughly cooled before cleaning or storing.
Wipe the heater with a damp cloth and dry thoroughly.
Store the heater in a dry area whilst not in use.

Specification

Voltage: 230V~50Hz
Output: 1200W
THE SCIENCE
BEHIND HEAT
EH0197WK Halogen Heater
7