Do you have a question about the CIR-EL6000-G1 and is the answer not in the manual?
Questions and answers
Benny Corpuz
February 8, 2025
Green Series Commercial Elliptical CIR-EL6000-GL.
QUICK START NOT WORKING!
1 comments:
Mr. Anderson
February 11, 2025
The Quick Start feature on the Green Series Commercial Elliptical CIR-EL6000-G1 may not be working due to the following reasons:
1. Pedaling Speed: The system requires pedaling over 30 RPM to wake up and initialize. If this speed is not reached, the system will not activate. 2. Power Issues: Ensure the elliptical is properly connected to a power source and turned on. 3. Paused or Shut Down: If pedaling stops for more than 30 seconds, the system will automatically shut down. Restarting may be necessary. 4. Control Panel Issues: The 'START' button must be pressed after waking up the system. If not pressed, Quick Start will not begin. 5. System Malfunction: If all steps are followed correctly and the feature still does not work, there may be a technical issue requiring maintenance or support.
If the issue persists, checking the manual for troubleshooting steps or contacting customer support may be necessary.
(10) years frame, five (5) years motor, three (3) years parts, two (2) years wearables and one (1) year labor from the initial install date. During this period, GREEN SERIES™ will repair or replace defective parts or equipment with new or reconditioned parts at GREEN SERIES™ option, without charge to customer.
3. GREEN SERIES™ shall not be held liable or responsible for any damages to the units caused during the install of any product.
Page 22
13. GREEN SERIES™ makes no warranty either expressed or implied regarding third-party (non-GREEN SERIES™) installed parts, accessories or modifications. 14. All GREEN SERIES™ equipment shall be properly cleaned and cared for in accordance to the procedures outlined the in the owner’s manual.
Page 23
(dependent on parts availability) via UPS. 3. GREEN SERIES™ will pay for shipping to and from the customer only within the time allocated under the warranty time-line following the original product installation date. Following this period all shipping fees for post warranty repairs are the sole responsibility of the customer.
Need help?
Do you have a question about the CIR-EL6000-G1 and is the answer not in the manual?
Questions and answers
Green Series Commercial Elliptical CIR-EL6000-GL. QUICK START NOT WORKING!
The Quick Start feature on the Green Series Commercial Elliptical CIR-EL6000-G1 may not be working due to the following reasons:
1. Pedaling Speed: The system requires pedaling over 30 RPM to wake up and initialize. If this speed is not reached, the system will not activate.
2. Power Issues: Ensure the elliptical is properly connected to a power source and turned on.
3. Paused or Shut Down: If pedaling stops for more than 30 seconds, the system will automatically shut down. Restarting may be necessary.
4. Control Panel Issues: The 'START' button must be pressed after waking up the system. If not pressed, Quick Start will not begin.
5. System Malfunction: If all steps are followed correctly and the feature still does not work, there may be a technical issue requiring maintenance or support.
If the issue persists, checking the manual for troubleshooting steps or contacting customer support may be necessary.
This answer is automatically generated