About Battery Types; Tipi Di Batterie - Pentax AF160FC User Manual

Auto macro flash
Hide thumbs Also See for AF160FC:
Table of Contents

Advertisement

AF160FC.book Page 15 Wednesday, February 11, 2009 3:44 PM
n About battery types
l Compatible batteries
Use four of the same type of battery.
• AA alkaline batteries (LR6)
• AA lithium batteries (FR6)
• AA Nickel-Metal Hydride (Ni-MH) batteries
l Non-compatible batteries
The following batteries cannot be used in the flash unit.
• AA manganese batteries
• AA nickel cadmium batteries (Ni-Cd)
l Recycling times and total number of flashes according to
type of battery
Battery type
AA alkaline batteries (LR6)
AA lithium batteries (FR6)
AA Nickel-Metal Hydride
(Ni-MH/2700mAh) batteries
* These figures are for new batteries that are the same type.
Note
• If the READY lamp does not light up soon after turning on the
power switch, the batteries may be exhausted or inserted
incorrectly.
Verify the orientation of the batteries, or if the READY lamp
still does not light up, replace them with new batteries.
• If charging takes more than 20 seconds, the batteries are
exhausted. The batteries need to be replaced.
n Tipi di batterie
l Batterie compatibili
Usate quattro batterie dello stesso tipo.
l Batterie non compatibili
Le seguenti batterie non si possono usare nel flash.
l Tempi di ricarica e numero totale dei lampi in base al tipo
Recycling
Total number
time
of flashes
Approx. 7 sec.
Approx. 150
Approx. 7 sec.
Approx. 250
Approx. 7 sec.
Approx. 200
Nota
• Batterie AA alcaline (LR6)
• Batterie AA al litio (FR6)
• Batterie AA nickel-metallo idruro (Ni-MH)
• Batterie AA al manganese
• Batterie AA al nickel cadmio (Ni-Cd)
di batteria in uso
Tipo di batteria
Batterie AA alcaline (LR6)
Batterie AA al litio (FR6)
Batterie AA nickel-metallo
idruro (Ni-MH/2700mAh)
* Questi dati si riferiscono a batterie nuove dello stesso tipo.
• Se la spia READY non si accende poco dopo l'accensione
dell'interruttore di alimentazione, le batterie possono essere
esaurite o inserite in modo scorretto.
Verificate l'orientamento delle batterie. Se la spia READY
ancora non si accende, sostituite le batterie con altre nuove.
• Se la ricarica del flash richiede oltre 20 secondi, le batterie
sono esaurite e vanno rimpiazzate.
1
Intervallo
Numero totale
di ricarica
di lampi
Circa 7 sec.
Circa 150
Circa 7 sec.
Circa 250
Circa 7 sec.
Circa 200
15

Advertisement

Table of Contents
loading

Table of Contents