Download Print this page

Kestrel 4000 NV Instruction Manual page 8

Pocket weather tracker
Hide thumbs Also See for 4000 NV:

Advertisement

Kestrel
4000 Pocket Weather
Tracker
®
®
Auto Store
When On, data is automatically stored at
preset Store Rate. When Off, data is only
(On/Off )
stored when manually captured with the
button.
Store Rate*
The frequency at which data sets are
automatically stored. (Battery life may be
(2 sec – 12 hr)
shortened if data is stored frequently.)
Overwrite
This setting only applies when the data
log is full. When On, oldest data point is
(On/Off )
discarded to allow memory for the new
data point. When Off, new data points are
not saved.
Man Store
When On, data is stored when the
button is pressed. When off, the
(On/Off )
disabled.
* When unit is off, data is NOT stored for 2 sec and 5 sec Store Rates.
Measurements
Measurement screens can be turned off, or "hidden" from the normal measurement navigation. For
example, if wind chill is not of interest, it can be hidden. Press the
and OFF for each individual measurement. Press the
Press the
button to return to the Main Setup Menu. Even when measurements are hidden, the Kestrel
Meter will continue to log data for all measurements. If you wish to see the logged data for measurements
Press
or
to toggle between
On and Off.
Press
or
to increase or
decrease Store Rate frequency.
Press
or
to toggle between
On and Off.
Press
or
to toggle between
button is
On and Off.
or
button to toggle between ON
or
button to highlight the desired measurement.
that are hidden, simply enter the Measurement screen and turn them back on. The data will be stored in the
same manner as all other measurements, as specified in the Store Rate.
Graph Scale
These settings control the chart limits of your Kestrel Meter. Depending on the conditions, the lower and
upper limits of the chart scale may need to be adjusted in order to get the best view of the data. Highlight
the desired measurement by pressing the
pressing the
button. Press the
or
button to increase or decrease the value of the limits. Press the
or
button to change between the upper and lower limits. Press the
Measurement Selection screen. Press the
Wind Speed
Temperature, Dewpoint,
Wet Bulb Temp, Wind Chill &
Heat Index
m/s meters per second
°C
Celsius
km/h kilometers per hour
°F
Fahrenheit
kt knots
mph miles per hour
ft/m feet per minute
Bft Beaufort
or
button. Select the highlighted measurement by
button to exit and return to the
button to return to the Main Setup Menu.
Pressure
Altitude,
Density
Altitude
InHg inches
m meters
mercury
ft feet
HPa hectopascals
psi pounds per
square inch
mb milibar
15

Advertisement

loading

This manual is also suitable for:

4000