Insert Batteries; Clock; Clock Reception; Manually Set Clock - Oregon Scientific BARM839 User Manual

the adapter should be disconnected from the main unit.
NOTE The main unit and adapter should not be exposed
to wet conditions. No objects filled with liquid, such as
vases, should be placed on the main unit and adapter.

INSERT BATTERIES

1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (see FIG 2).
3. Press RESET after each battery change.
indicates batteries are low.
NOTE Batteries should not be exposed to excessive
heat such as sunshine or fire.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
BARM839:
Slide EU / UK to select the signal received.
EU: DCF-77 signal: within 1500 km (932 miles) of
•
Frankfurt, Germany.
UK: MSF-60 signal: within 1500 km (932 miles) of
•
Anthorn, England.
P/N:086L004984-024 REV1
BARM839A:
WWVB-60 signal: within 3200km (2000 miles) of Fort
•
Collins Colorado. Manually set clock to select time
zone (Pacific, Mountain, Central or Eastern).
To enable / disable signal reception:
Press and hold VOL + to enable or VOL - to disable
signal reception.
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG SIGNAL WEAK SIGNAL

MANUALLY SET CLOCK

1. Press and hold MODE.
2. Press VOL + or VOL - to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (day-month /
month-day), month, day and language.
BARM839: Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
4
NO SIGNAL