Changzhou Longer Electronics Co.,Ltd Address:Fl.4, No.431‐1,Gongrenxincun,Changzhou,Jiangsu, P.R.China Website: www.cldic.com Email: czlyw@cldic.com,czlyw@vip.163.com CLR7992 LONGER URC User Manual(Preliminary) 2015-7-8 1, General Description CLR7992‐E2 is a 2in1 universal remote control(URC). CLR7992‐E4 is a 4in1 universal remote control(URC). CLR7992 is developed based on Longer programmable remote control(PRC) solution. 2, Features 2/4 device banks. Contains about 800 pcs codes which are selected from Longer PRC database. It can control TV/VCR/DVD/DVB/SAT/CD/HIFI and other devices. Code number setup, manual code search, auto code search. 6 URC codes updatable. Used to amend URC codes.(Only available in Audio cable programming) URC code number checking. 40pcs FAV channels. (Only available in Audio cable programming) ...
Page 4
Changzhou Longer Electronics Co.,Ltd Address:Fl.4, No.431‐1,Gongrenxincun,Changzhou,Jiangsu, P.R.China Website: www.cldic.com Email: czlyw@cldic.com,czlyw@vip.163.com CLR7992 LONGER URC User Manual(Preliminary) 2015-7-8 (2) Manual Code Search (a) (For CLR7992‐E2) Any one of and , (For CLR7992‐E4) Any one of , , LED ON (b) + or EXIT: ...
Changzhou Longer Electronics Co.,Ltd Address:Fl.4, No.431‐1,Gongrenxincun,Changzhou,Jiangsu, P.R.China Website: www.cldic.com Email: czlyw@cldic.com,czlyw@vip.163.com CLR7992 LONGER URC User Manual(Preliminary) 2015-7-8 5, Operation Guide 5.1 URC manual code setup (1) Find the brand of your set in booklet(App). Press the key corresponding to the device you want( or or ) , the LED gives a short blink. (2) Keep keys and pressed down until the LED stays lit; release the keys. (3) Enter the four digits found; the LED confirms by turning OFF. (If pressing unknown or mistake buttons, giving 2 short blinks.) ...
Changzhou Longer Electronics Co.,Ltd Address:Fl.4, No.431‐1,Gongrenxincun,Changzhou,Jiangsu, P.R.China Website: www.cldic.com Email: czlyw@cldic.com,czlyw@vip.163.com CLR7992 LONGER URC User Manual(Preliminary) 2015-7-8 the device power off again, go to step (5), otherwise, go to step (6). (6) Press button to exit the search mode, or exit automatically without key pressing in 20 seconds. 5.4 6 URC codes updatable Once some often‐used codes are not included inside URC, at most 6pcs URC codes may be amended from PC ...
Changzhou Longer Electronics Co.,Ltd Address:Fl.4, No.431‐1,Gongrenxincun,Changzhou,Jiangsu, P.R.China Website: www.cldic.com Email: czlyw@cldic.com,czlyw@vip.163.com CLR7992 LONGER URC User Manual(Preliminary) 2015-7-8 5.7 Programmable remote control(PRC) With the software in PC and the app in smart phone, one code can be programmed into URC. You can search code by brand, model or URC code number in the software and app, and program it into URC via USB/IR programmer or audio cable. This code numbers are 8001. Once you program it into URC, it will store in URC forever. You may recover it by entering 4 digits (8001) after you setup other codes in the device bank. 5.8 USB/IR programming It consists of a USB/IR programmer and a software in PC. Please download the software from the website and install it. The software includes all of URC settings, including as below. (1) URC code number setup (2) 6pcs updatable codes setup ...
Changzhou Longer Electronics Co.,Ltd Address:Fl.4, No.431‐1,Gongrenxincun,Changzhou,Jiangsu, P.R.China Website: www.cldic.com Email: czlyw@cldic.com,czlyw@vip.163.com CLR7992 LONGER URC User Manual(Preliminary) 2015-7-8 For more operation details, please check it in App. In order to enter programming mode, please press (LEFT) button and (RIGHT) button at the same time. Then the LED will keep ON. You may setup functions in App and press “Program”. If the URC receives the signal, the LED will flash. If the URC receives the successful code, the LED turns OFF. Otherwise, it keeps ON. The LED will be OFF without receiving signal in 10 seconds. The help video can be checked in http://www.cldic.com/en/en_CLR7992URCsetup_2015_video.htm 5.10 Reset to factory setting (1) Keep keys and pressed down until the LED stays lit; release the keys. (2) Enter the four digits 8900; the LED confirms by turning OFF. ...