During The Call - Motorola st7868w Manual

116
Placing a Data Call
Keep in mind: You will not be able to place a data or fax call
through your phone's keypad, using last ten dialed, or with
Caller ID. All data and fax calls must be placed through your
computer.
1. Connect
2. Place
Call

During the Call

Reading the Display
Once the call is successfully connected, your phone's display will
show transmission information.
Time elapsed
Connection speed
Type of call
Connection number
Rate for sending
Rate for receiving
Make sure the cable is connected properly.
Open the application on your computer, like a
fax or dial-up application, and place the call
through the application on your computer.
The phone will display the number your com-
puter is calling (or the name if in the internal
Phone Book). You will see: Connecting.
If the call is not connected, your phone will
return to the idle display.
F a x 1 4 . 4 0 : 1 2 : 1 1
8 4 7 - 5 5 5 - 1 2 1 2
T x
R x
IU