Samsung AQV09EWAN Service Manual page 16

No Parts
3 Fan
&
Motor
4 Heat Exchanger
5 Ass'y Valve 4-Way
&
Ass'y Valve EEV
6 Compressor
Samsung Electronics
Procedure
1) Release the refrigerant at first.
2) Loosen fixing screw(CW). (Use Monkey
Spanner.)
3) Disassemble the pipes in both inlet and outlet
with welding torch.
4) Detach the Heat Exchanger.
1) Loosen 2 fixing screws(CCW) on both sides.
(Use +Screw Driver.)
2) Disassemble the pipes in both inlet and outlet
with welding torch.
3) Detach the Heat Exchanger.
Before you disassemble the pipes and
Condenser, be sure that there should be no
refrigerant remained in the unit.
1) Loosen 4 bolts(CCW) fixed to assemble Valve
Service with Bracket Valve like the picture on
the right side. (Use Monkey Spanner.)
2) Disassemble the pipes assembled the suction
and discharge sides of the Compressor with
welding torch.
1) Loosen the Nut(CCW) of Terminal Cover. (Use
Monkey Spanner.)
2) Detach the Terminal Cover and detach the
Connect Comp Wire from Compressor.
3) Disassemble the Felt Comp Sound.
4) Loosen the 3 bolts(CCW) at the bottom of
Compressor like the picture on the right side.
(Use Monkey Spanner.)
Operating Instructions and Installation
Remark
3-13