Replacing The Battery; Troubleshooting - Makita TDG-BR100 Operating Instructions Manual

Replacing the battery

If the LED indicates low battery power, replace the battery. Use a CR2032 battery.
TDG-BR100
Open the battery
cover.
Coin, etc.
Note
When opening or closing the battery cover, make sure the coin, etc., is properly
inserted in the groove of the battery cover.
TDG-BR50
Push the button.
Battery (CR2032)
Push the button of the battery cover with the tip of a pen, etc. ()

Slide the battery cover upward to open. ()

Slide the battery cover to close. ()


Troubleshooting

In the event of a problem, refer to the TV's instruction manual.
Push here
and remove
the battery
at an angle.
Align the two
marks.
Battery
(CR2032)

(GB)