Sharp MX-FXX1 Quick Reference Manual page 24

Hide thumbs Also See for MX-FXX1:
Table of Contents

Advertisement

TABLE OF CONTENTS FOR TROUBLESHOOTING
See the following table of contents to locate the appropriate page for your question or problem.
PROBLEMS RELATED TO TRANSMISSION
• Transmission does not take place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
• The transmitted fax prints out blank at the receiving side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• The transmitted fax is reduced by the receiving fax machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Transmission does not begin at the specified time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PROBLEMS RELATED TO RECEPTION
• Printing does not take place after reception. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• Manual reception / polling reception are not possible. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• The received image is faint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• The machine does not begin fax reception. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Problems Related to Audible Signals
• The volume is too low. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• No sound is heard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• A one-touch individual key or group key cannot be edited or deleted. . . . . . . . . . . . . . . . . . . . . . . . . 27
• If you cannot find the item that you are looking for in the above table of contents, See "OTHER PROBLEMS" in the
separate Troubleshooting.
• If you are unable to solve a problem using the solutions in this guide, switch off the [POWER] key (
power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key (
order.
* When the LINE indicator is lit or the DATA indicator is lit or blinking, do not switch off the main power switch or unplug
the power cord. This may damage the hard drive or cause the data being stored or received to be lost.
• System settings
Descriptions of the system settings similar to the following example appear in this manual.
Example: ➞ System Settings (Administrator) > "Image Send Settings" > "Fax Settings" > "Fax Default Settings" >
"Dial Mode Setting"
This is an abbreviated description of the procedure for selecting the setting. ">" indicates a level in the settings. Use
these descriptions as a quick guide to help you configure the settings. For information on the system settings for fax,
see "11. SYSTEM SETTINGS FOR FAX" in the Facsimile Guide.
22
) and the main
) in that

Advertisement

Table of Contents
loading

Table of Contents