Ninja NJ100 series Owner's Manual page 9

Hide thumbs Also See for NJ100 series:

Place the power head on top of the splash guard

making sure that it is securely in place. (Fig. 4)

To start the appliance, plug the power cord into the

mains power supply. While holding the power head,

press down on the paddle located on top of the

power head in short intervals. (Fig. 5)

Hold the bowl while pulsing the On/Off paddle to

ensure the unit stays in place.

NOTE: DO NOT operate the appliance

continuously for more than 15 seconds at a time. Be

careful not to over process. For coarsely chopped

foods, use repeated short pulsing action until the

desired consistency is reached.

10 To stop the appliance, remove your fingers from the

on/off paddle.

11 For best results, press the on/off paddle in short

pulses.

12 Make sure that the blades have stopped completely

before removing the power head.

13 Remove the blade assembly by its shaft before you

empty the contents of the processing bowl.

14 Place the storage lid onto the top of the processing

bowl and close the flap to store. (Fig. 6)

Fig. 4

Fig. 5

Storing

• Place the lid securely on the bowl and close the flap

to store.

• Remove the chopping blade when storing the bowl

with food inside.

www.sharkninjamanuals.com

Fig. 6

Table of Contents