Mazda 2 2014 Owner's Manual page 173

Interior Comfort
Climate Control System
Mode selector dial
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
The mode selector dial can be set at the
l
intermediate positions (
between each mode. Set the dial to an
intermediate position if you want to slightly
adjust the airflow amount.
For example, when the mode selector dial is
l
at the position between the
positions, airflow from the floor vent is less
than that of the
When the mode selector dial is in the
l
position, use the air intake
selector in the
mode).
The indication is designed to inform
l
the front occupants to switch the air intake
selector lever to the
air mode), while the mode selector dial is
turned to the or
defogging of the windshield.
í
A/C switch
í
6-6
Some models.
or )
and
position.
position (outside air
position (outside
position, to speed
Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Press the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function when the
outside temperature approaches 0 °C (32 °F).
Air intake selector
This lever controls the source of air
entering the vehicle.
It is recommended that under normal
conditions the lever be kept in the outside
air position.
Outside air position (
Outside air is taken into the vehicle. Use
this position for normal ventilation and
heating.
Recirculated air position (
Outside air is shut off. Air within the
vehicle is recirculated.
This position can be used when driving on
a dusty road or in similar conditions. It
also helps to provide quicker cooling of
the interior.
)
)