Advertisement
Using the Ninja
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
IMPORTANT: Never run the appliance empty.
1
Place the processor bowl on a clean, dry, level
surface.
2
Holding the chopping blade by the shaft, carefully
place it over the spindle pin inside the processing
bowl. (Fig. 1)
IMPORTANT: Always assemble the blades inside
the container.
WARNING: DO NOT try to place the blades
onto the power head and then into the Ninja
Professional Stackable Chopper.
FREEPHONE: 0800 51 41 31
7
Professional Stackable Chopper
®
Shaft
Fig. 1
®
3
Carefully spin the blade counter clockwise to make
sure that it has inserted properly. (Fig. 2)
4
Place the food ingredients into the bowl.
IMPORTANT: Never add ingredients into the
processing bowl before placing the blade assembly
in first.
CAUTION: DO NOT add more than 2 cups dry or
1 cup liquid ingredients as this may cause overflow.
5
Place the splash guard / storage lid on the bowl.
(Fig. 3)
CAUTION: DO NOT operate without the splash
guard in place.
6
Open the flap on the splash guard. (Fig. 3)
Fig. 2
Open Flap
Fig. 3
Advertisement
