Setting Up The Network Setup Options; Network Selection; Cable Network - Samsung BD-P1600 User Manual

Lletworb: setup _
SETTING UP THE NETWORK SETUP OPTIONS
To obtain information on the proper settings, check the network settings on your computer or contact
your Internet provider.
To set the network of your Blu-ray Disc player, follow the steps below.
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
2. Press the" T buttons to select Setup, then press the
ENTER or
~
button.
3. Press the" T buttons to select Network Setup, then
press the ENTER or ~
button.
4. Press the ..
T
buttons to select the desired network
option from the options described below, then press the
ENTER or ~
button.
5. Press the"
T
buttons to select the desired item, then press the ENTER button.
Each network option is described in detail below.
Network Selection
Select Cable or Wireless as the method to connect to
network.
To setup, follow steps 1-3 on page 48.
4. Press the .. T buttons to select Network Selection,
then press the ENTER or
~
button.
• Cable: Select this to connect to the network using a
cable. (see page 29)
• Wireless: Select this to connect to the network
wirelessly. (see page 30)
Cable Network
To setup, follow steps
1-3
on page
48.
4. Press the .. T buttons to select Cable Network, then
press the ENTER or ~ button.
5. Press the" T buttons to select DHCP, then press the
ENTER button.
If DHCP is set to On, you can't select IP Address, Subnet
Mask or Gateway.
If DNS is set to Auto, you can't select Primary/ Secondary
DNS.
48 .... networl\ setup