First steps
Connecting to the phone
ì
Connect the Gigaset SX763 WLAN dsl with the analogue phone as follows:
– Insert the plug of the telephone into the Phone 1 or Phone 2 port on the Gigaset
SX763 WLAN dsl.
Note:
You cannot make
VoIP
also
not accessible in this case.
Connecting wired to the PC
You can connect wired or wireless PCs to your Gigaset SX763 WLAN dsl to create a local
area network (LAN). Wireless connection is possible after connecting the Gigaset SX763
WLAN dsl to the power supply (see page 31).
First connect just one PC to the Gigaset SX763 WLAN dsl, wired connection is recom-
mended. You can then carry out the general configuration. (If you wish to connect more
PCs, please turn to page 34.)
ì
Connect one of the LAN ports (LAN1 – LAN4, yellow) on the Gigaset SX763 WLAN
dsl to the Ethernet network card in your PC. To do this, use the LAN cable supplied
(CAT5, yellow).
30
calls in the event of a power failure. Emergency numbers are