INTRODUCTION First of all we would like to thank and congratulate you for the purchase of this product manufactured by Golmar. The commitment to reach the satisfaction of our customers is stated through the ISO-9001 certification and for the manufacturing of products like this one.
MODULE INSTALLATION MODULE INSTALLATION mbedding box positioning. old the module on the embedding box. Select a direction to open the module; this selection should ease the door panel wiring. The opening direction will be settled through the hinges position, that must be passed through the header clips as shown. For example, if the hinges are placed on both clips of the lower header, the module will open downwards;...
IP mode allows to use this module in combination with "Stadio Plus" IMPORTANT: this module is to be used with ISO cards or key holders supplied by Golmar. Other proximity items will be not accepted panels, or to operate as stand alone module. The operation mode selection is shown on page 3.
MODULE PROGRAMMING LOCK RELEASE INSTALLATION 4Plus operation mode. ock release installation. Use this operation mode to connect the module to a C4Plus access control system. In this case, the C4Plus relays will be activated instead of the module internal relay. If the lock release will be installed in a metal door, use a 3,5 x 25 Ø3,5mm.
INSTALLATION DIAGRAMS INSTALLATION DIAGRAMS tand alone operation. ombined on 'Stadio Plus' door panels. The enclosed diagram uses a TF-104 transformer (12Va.c.) as access control module feeder. One access door audio systems with 4+'n' installation. 3502/AL EL550, EL554 or EL555 TF-104 Access control module sound modules transformer...
Page 7
Golmar se reserva el derecho a cualquier modificación sin previo aviso. Golmar se réserve le droit de toute modification sans préavis. Golmar reserves the right to make any modifications without prior notice.