Advertisement
S5 When EDID was written successfully that will show below
message on the screen
1A1H
Hardware Configuration:
1. Connect the PRINTER PLUG of DDC FIXTURE with the
printer port of Desktop PC.
2. Plug USB A PLUG of DDC FIXTURE to USB socket of
Desktop PC
3
Use DVI transfer HDMI cable connect between of the DVI
EXTENDING SOCKET and Monitor
4
Take a video cable then connect the D-SUB PLUG and the
D-sub socket of monitor.
5. Re-confirm all the connectors are connected well.
VGA CONNECTION
7. Writing EDID Process
PARALLEL CONNECTION
USB CONNECTION
HDMI TRANSFER DVI CONNECTION
Entering Factory mole to let "EDID WP" be off
Writing EDID procedure for
S1 Choose the folder "X233H-H233H-1A1H"
Double click " Acer_1A1H_RLT "
The writing process same as writing VGA and DVI
process.
S5 When EDID was written successfully that will show below
message on the screen
ACER H233H
Go to cover page
1A1H
39
Hide quick links:
Advertisement
