Advertisement
BDC atomizer head Replacement:
Screw the base off connector firstly. Pull out the BDC atomizer head from the base and
replace a new one.
Base
BDC Atomizer Head
Properties
Over-current Protection: When over-current protection occurs, the vaping seconds
on the LED digital screen will stop increasing. Two seconds later, the LED digital screen
will show the current voltage for five seconds. At the same time, the button light will flash
five times.
Short-circuit Protection: When short-circuit occurs, the battery will shut off
automatically.
Low-voltage Protection: When the voltage of battery is below 3.3V, the button light
will flash 40 times. At the same time, the LED digital screen will go out.
Unlock the Low-voltage Protection:When the voltage of battery is above 3.65V, the
low-voltage protection will be unlocked.
Precautions
a) Only have your iJust D16 Kit repaired by Eleaf. Do not attempt to repair the unit by
yourself as damage or personal injury may occur.
b) Do not leave the iJust D16 Kit in high temperatures or damp conditions, otherwise it
may be damaged. The appropriate operation temperature is within 0℃to45℃ while
charging and -10℃ to 60℃ while using.
c) Do not attempt to combine the iJust D16 Kit with parts from other brands of
e-cigarettes. If it is damaged in this way, our company will not take on responsibility
and your warranty will be void.
Warranty
Please consult your Eleaf product warranty card. We are not responsible for any
damages caused by human error. Our warranty is not available for products purchased
from third-party vendors.
Atomizer Tube
Email:info@ismoka.com
Web:www.eleafworld.com
Mouthpiece
Advertisement
