Summary of Contents for JR Transrotor ZET 1
-
Page 1: Operating Instructions
Transrotor ZET 1 & ZET 3 Operating instructions RÄKE HIFI/VERTRIEB GMBH, IRLENFELDER WEG 43, D-51467 BERG. GLADBACH Telephone 02202/31046 Telefax 02202/36844... - Page 2 Transrotor turntables are master pieces of fine mechanics, an expression of a consequent sense of craftsmanship. Transrotor’s goal is to build a device for the customer, which sounds excellent, which can be operated comfortably and logically, which is made from the best materials, which works for tens of years and makes easy repair service possible.
- Page 3 Setup Start with the setup of the system where the turntable will finally be placed, because you cannot transport the system afterwards easily. To avoid finger prints on the plexiglas, please put on the delivered cotton gloves. 1. Align the three spike bases in a triangular shape on the table. 2.
- Page 4 Always switch off the motor before putting on or taking off a record. Listening to records 1. Put a record on the turntable. 2. In case a record weight is available put it on the spindle to ensure that even slightly billowy records can be played with high accuracy in highest excellence.
- Page 5 Maintenance advice The Transrotor turntable is made of the very best materials. All parts are robust and low-maintenance and for long-year-durability. In order to keep your equipment as good as new, follow these advice: Cover, Chassis and turntable Always use a moisty leather for normal cleaning. Never use a dry cloth cause otherwise the surface will scratch increasingly.
- Page 6 Additional data ZET 1 ZET 3 Dimensions Dimensions: 45,5 cm x 40 cm x 18 cm 45,5 cm x 40 cm x 22 cm Gewicht: Weight: Weight: approx. 22 Kg approx. 28 Kg In case of questions regarding the turntables or additional parts ask the local retailer or call the service phone: monday till thursday from 15:00 h –...
Need help?
Do you have a question about the Transrotor ZET 1 and is the answer not in the manual?
Questions and answers