Advertisement
7. Installing the Casters
Follow the steps below to install the casters.
1.Empty the inside of the cabinet completely and lay the fridge down on it's side.We recommend
that you place a piece of cardboard or cloth underneath the cabinet to prevent dents or scratches.
2.Insert the casters into the holes on the bottom corners of the cabinet.Tighten each caster by turning
the nut clockwise with a wrench(not provided in the kit).
3.Once all four casters have been tightened,stand the cabinet in its upright position.
Note:Two of the casters include locking mechanisms to ensure the unit does not slide on hard floors.
These two locking casters should be fastened at the front end of the unit,with the unlocked casters
fasted on the rear end.
10
Advertisement
