Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Bush CR-200PL
Summary of Contents for Bush CR-200PL
- Page 1 Instruction Manual CR-200PL...
-
Page 2: Table Of Contents
Table of content ..................... Warnings ............UK Mains Plug infromation ................. Location of Control ................Battery Backup ................Standby Mode ................Setting The Clock ..............Power On/radio Mode ................Radio Operation .......... Presetting Your Favourite Radio Stations ..............Dual Alarms Operation .............. -
Page 3: Battery Handling And Usage
WARNINGS This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non domestic use or in a commercial environment. Ventilation Allow at least a 10 cm gap all around the product. ... -
Page 4: Uk Mains Plug Infromation
The battery type used in the unit is 2 x 1.5V AAA size batteries (not included) which are accessible and can be replaced. Remove the battery cover located at the bottom of the unit to remove the batteries. -
Page 5: Location Of Control
LOCATION OF CONTROL Top and Side Views Front View 12. MEM button 1. POWER button 13. Battery cover (at the bottom) 2. Display 14. PROJECTOR ON/OFF button 3. VOLUME / AL2 button 15. Projector wheel 4. VOLUME / AL1 button 16. -
Page 6: Radio Operation
Whilst the display is flashing, repeatedly press HR and MIN respectively until the desired clock time appears. Press and hold HR and MIN respectively for fast advance. Press SET to confirm. The hour and minute digits will stop flashing. POWER ON/RADIO MODE Press POWER to switch the unit on and enters the radio mode. -
Page 7: Dual Alarms Operation
To listen to preset radio stations, press MEM repeatedly to select the desired radio station. DUAL ALARMS OPERATION Before setting the alarm time, make sure the Clock has been set. Setting Alarm 1 or Alarm 2 In standby mode, press and hold AL1 / AL2 for 2 seconds. ... -
Page 8: Projector
selected. To turn off the radio before the sleep time has elapsed, press POWER. PROJECTOR With this projection function, you can conveniently project the clock time onto a surface e.g. walls. To turn on or off the projection, press PROJECTOR ON/OFF. ...