HP ProBook 640 G1 Maintenance And Service Manual page 81

Description
512-GB, SATA-3 solid-state drive supporting TLC
256-GB, SM841 Samsung locked solid-state drive supporting Opal2 (for use only on computer models
equipped with a 15.6-in. display assembly)
256-GB, SM841 Samsung locked solid-state drive supporting Opal2 (for use only on computer models
equipped with a 14.0-in. display assembly)
180-GB, SATA-3 solid-state drive (for use only on computer models equipped with a 15.6-in.
display assembly)
180-GB, SATA-3 solid-state drive (for use only on computer models equipped with a 14.0-in.
display assembly)
128-GB, SATA-3 solid-state drive (for use only on computer models equipped with a 15.6-in.
display assembly)
128-GB, SATA-3 solid-state drive (for use only on computer models equipped with a 14.0-in.
display assembly in all countries and regions except Brazil
128-GB, SATA-3 solid-state drive (for use only on computer models equipped with a 14.0-in.
display assembly in Brazil)
Before removing the solid-state drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the solid-state drive:
1. Remove the two Phillips screws (1) that secure the solid-state drive to the system board. (The solid-
state drive tilts up.)
2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.
Battery on page 56).
Service cover on page 57).
Component replacement procedures
Spare part number
829939-001
834423-001
834422-001
749262-001
749278-001
749261-001
749277-001
749280-001
71