Turn And Lane-Change; Signals; Front Fog Lamps - Cadillac CTS 2012 Owner's Manual

Hide thumbs Also See for CTS 2012:
Table of Contents

Advertisement

Cadillac CTS/CTS-V Owner Manual (Mid-East) - 2012

Turn and Lane-Change

Signals

An arrow on the instrument panel
cluster flashes in the direction of the
turn or lane change.
Move the lever all the way up or
down to signal a turn.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it briefly until the lane
change is complete. The arrow will
automatically flash three times.
The lever returns to its starting
position when it is released.
If after signaling a turn or lane
change the arrow flashes rapidly
or does not come on, a signal bulb
may be burned out.
Have the bulbs replaced. If the bulb
is not burned out, check the fuse.
See Fuses and Circuit Breakers on
page 9 36.
Turn Signal On Chime
If the turn signal is left on for about
1.6 km (1 mi), a warning chime will
sound and the TURN SIGNAL ON
message will appear on the Driver
Information Center (DIC) display.
See Turn Signal On under Lamp
Messages on page 4 44 for more
information.
Black plate (5,1)
Lighting

Front Fog Lamps

Use the fog lamps for better vision
in foggy or misty conditions. The fog
lamp control is located on the turn
signal/multifunction lever next to the
fog lamp symbols.
(Front Fog Lamps): Turn the
fog lamp band on the lever up to
and release it, to turn the front fog
lamps on or off. The band will return
to its original position.
The parking lamps must be on for
the fog lamps to work.
If the high-beam headlamps are
turned on, the fog lamps will also
turn off. They will turn back on again
when you change back to low-beam
headlamps.
5-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cts-v 2012

Table of Contents