Summary of Contents for Victron energy Phoenix Multi 120VAC
- Page 1 USER MANUAL Phoenix Multi 120Vac 12/1600/70 12/2500/120 24/1600/40 24/3000/70 Phoenix MultiPlus 120Vac 12/2500/120 24/3000/70 Phoenix Inverter 120Vac 12/1600 12/2500 24/1600 24/3000...
- Page 2 THE FORM OF ACTION, SHALL NOT EXCEED THE PURCHASE PRICE OF THE VICTRON ENERGY PRODUCTS DESCRIBED HEREIN. Victron Energy B.V. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication and may not...
-
Page 4: Safety Rules
SAFETY RULES General Please familiarise yourself with the safety features and instructions by first reading the documentation supplied with this product before using the equipment. This product has been designed and tested in accordance with international standards. The equipment must be used exclusively for the purpose for which it was designed. W ARNING: ELECTRIC SHOCK HAZARD. - Page 5 1 DESCRIPTION 1.1 General Multi-functional (Multi/ MultiPlus only) The Multi gets its name from the multiple functions it can perform. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Beside these primary functions, however, the Multi has several advanced features that provide a range of new applications as outlined below.
- Page 6 Learn more about batteries and battery charging To learn more about batteries and charging batteries, please refer to our book ‘Electricity on Board’ (available free of charge from Victron Energy and downloadable from www.victronenergy.com). For more information about adaptive charging please look under...
- Page 7 1.3 List of Article Numbers for Accessories Phoenix Multi control REC020002010 Phoenix Inverter control SDRPPIV Temperature sensor TI SDRPSENSTI MultiPlus Conn. kit 3-phase operation EQU000002000 MultiPlus Flat cable for 3-phase connect ASS030003000 Flat cable for parallel connect ASS030063000 UTP Patch lead 5 m ASS030065000 UTP Patch lead 10 m ASS030065010...
-
Page 8: Operation
2 OPERATION 2.1 On/ Off Charger Only Switch When switched to "on", the product is fully functional. The inverter will come into operation and the LED "inverter on" will light up. Multi/ MultiPlus only: An AC voltage connected to the "AC in" terminal will be switched through to the "AC out" terminal, if within specifications. - Page 9 2.3 Special Charger Modes Equalizing Some batteries may need a regular equalizing charge. To perform an equalizing charge the Phoenix Multi can charge at a higher voltage (1V above the absorption voltage for a 12V battery, 2V for a 24V battery) for a period of one hour. The charger current is then limited to 1/4 of the specified value.
- Page 10 2.4 LED Indications and What They Mean LED off LED flashes LED illuminated Inverter charger inverter mains on inverter on The inverter is switched on and bulk overload supplies power to the load. absorption low battery charger float temperature only charger inverter mains on...
- Page 11 charger inverter mains on inverter on The electronics temperature is bulk overload becoming critical. absorption low battery charger float temperature only charger inverter mains on inverter on The inverter has switched off due to bulk overload the electronics temperature being too high.
- Page 12 Battery Charger charger inverter mains on inverter on The mains voltage is switched bulk overload through and the charger operates in bulk mode. absorption low battery charger float temperature only charger inverter The mains voltage is switched mains on inverter on through and the charger is charging.
- Page 13 Special Indications PowerControl charger inverter The mains voltage is switched mains on inverter on through. The AC output current is bulk overload equal to the preset maximum input current. The charge current is absorption low battery reduced to 0. charger float temperature only...
- Page 16 Serial number: Distributor: Victron Energy B.V. The Netherlands General phone: +31 (0)36 535 97 00 Customer support desk: +31 (0)36 535 97 77 General and Service fax: +31 (0)36 531 16 66 Sales fax: +31 (0)36 535 97 40 E-mail: sales@victronenergy.com...