Sanyo C14PL60 Instruction Manual page 10

This function can be used to change the startup condition of the TV set.
When "ITEM – 2" is set to "SET + 1", AV mode is always selected when the TV is
turned on.
mu
(
Setting procedure
When the TV set is turned on,
AV mode is always seiected.
II
1 Press and hoid the FUNCTION @ button on the front control panel of the TV set, then
press the RECALUCOLOUR SYSTEM@ button on the remote control transmitter.
l~flR,----le~. +
'EM-' 'ET+O
•1
2 Select" ITEM – 2" by pressing the FUNCTION ~ button.
u
Each time the FUNCTION button is
pressed, setting item changes as foiiows;
lTEM-1~1'TEM-2
~ Seiect" SET+ 1 "by pressing the LEVEL(+ or - ) @ button of the remote
U control transmitter or the TV set.
4 Press the RECALL/COLOUR SYSTEM @ button to return to the normal TV mode.
[
Canceiiing procedure
1
Enter to the setting mode using mode using above procedure ~ Select "iTEM – 2" by
pressing the FUNCTION button ~ Change "SET ~ 1" to "SET+ O" by pressing the
LEVEL( + or- ) button ~ Press the RECALL/COLOUR SYSTEM button to return to
the normai TV mode.
Start up condition of the TV set return to the factory
m 'Urnedono
shipment condition, meaning that the previously viewed
programmeposition is always selectedwhen the TV set is
-9–