Chevrolet Corvette 2014 User Manual page 73

4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate Chevrolet MyLink on
the display. Follow the
instructions provided in Step 3,
to enter the PIN. After the PIN is
successfully entered or the code
is confirmed, the system
responds with <Device name>
has been successfully paired
when the pairing process is
complete.
6. If Chevrolet MyLink does not
appear, turn the phone off or
remove the phone battery and
retry.
7. If the phone prompts to accept
connection or allow phone book
download, select Always Accept
and Allow. The phone book may
not be available if not accepted.
8. Repeat Steps 1 7 to pair
additional phones.
Listing All Paired and Connected
Phones
1. Press the PHONE screen
button.
2. Select PHONES.
Disconnecting a Connected Phone
1. Press the PHONE screen
button.
2. Select PHONES.
z
3. Press the next to the phone to
disconnect.
Deleting a Paired Phone
Only disconnected phones can be
deleted.
1. Press the PHONE screen
button.
2. Select PHONES.
3. Press the next to the phone
to delete and follow the on
screen prompts.
Infotainment System
Linking to a Different Phone
To link to a different phone, the new
phone must be in the vehicle and
paired to the Bluetooth system.
1. Press the PHONE screen
button.
2. Select PHONES.
3. Select the new phone to link to
from the not connected
device list.
Switching to Handset or
Handsfree Mode
To switch between handset or
handsfree mode, press the PHONE
icon on the Home Page to display
Call View.
While the active call is
hands-free, press the Handset
screen button to switch to the
handset mode. The screen
button changes to Handsfree
once the Bluetooth device
confirms it is operating as
handset.
73