Cruise Control; Adaptive Cruise Control (Acc) - Acura 2016 ILX Owner's Manual

DRIVING

Cruise Control*

Maintain a constant vehicle speed without having to keep your foot on the
accelerator pedal. Use cruise control on freeways or open roads where you can
travel at a constant speed with little acceleration or deceleration.
Setting the Vehicle Speed
1. Press CRUISE. The CRUISE MAIN indicator appears.
2. Accelerate to the desired speed (above 25 mph/40
km/h). Press DECEL/SET and take your foot off
the pedal to set the speed. The CRUISE CONTROL
indicator appears.
Adjusting the Vehicle Speed
Press RES/ACCEL to increase or DECEL/SET to decrease
speed.
Each time you press the button, the vehicle speed is
increased or decreased by about 1 mph (1.6 km/h).
If you keep the button pressed, the vehicle speed
increases or decreases until you release it.
Canceling Cruise Control
Press CANCEL, CRUISE, or the brake pedal. The CRUISE
CONTROL indicator goes off.
After cruise control has been canceled, you can still
resume the prior set speed by pressing RES/+ while
driving at a speed of at least 25 mph (40 km/h).
Press CRUISE to turn the system off.
WARNING
Improper use of the cruise control can lead to a crash.
Use cruise control only when traveling on open highways in good weather.
96 |

Adaptive Cruise Control (ACC)*

Helps maintain a constant vehicle speed and a set following inteval behind a
vehicle detected ahead of yours.
CRUISE button
RES/ACCEL button
DECEL/SET button
CANCEL button
*if equipped
Activating and Setting the Vehicle Speed
1. Press MAIN. The ACC indicator appears.
2. Accelerate to the desired speed above 25 mph (40
km/h). Press DECEL/SET and take your foot off the
pedal to set the speed.
Adjusting the Vehicle Speed
Press RES/ACCEL to increase speed or DECEL/SET to
decrease speed.
Each time you press the button, the vehicle speed is
increased or decreased by about 1 mph (1 km/h). If you
keep the button pressed, the vehicle speed increases or
decreases by 5 mph (5 km/h) until you release it.
Adjusting the Vehicle Distance
Press the Distance button to change the following
distance. Each time you press the button, the
following distance setting cycles through short,
middle, long, and extra long.
Switching to Standard Cruise Control
Press and hold the Distance button. Cruise Mode appears in the multi-
information display. Press and hold the button again to switch back to ACC.
DRIVING
MAIN button
RES/ACCEL button
DECEL/SET button
CANCEL button
Distance button
*if equipped
| 97