1. Manuals
  2. Brands
  3. Lightinthebox Manuals
  4. Security System
  5. GS-G90E
  6. Instruction manual

Lightinthebox GS-G90E Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
Preface]
Thank you for choosing the wireless alarm system product of our company.
Wireless alarm system adopts the most advanced digital sensing and
controlling technologies, it is the intelligent alarm control system containing burglar
alarm, fire alarm, fire fighting, gas leakage and SOS.
Wireless alarm system uses the most advanced multiple random selection
technology, it avoids the problems of interference and alarm missing which usually
exist in the similar systems. This system can be used widely in residence, shops,
villa, and small enterprise and so on.
For your safety, before installing and using, we suggest you read this manual
carefully.
Caution：To ensure that you can enjoy the impeccable warranty service, do not
open the host-housing to repair and renovation by yourself or we will not provide
free warranty service. All the losses and the adverse consequences it makes will be
assumed by users.
Please make safekeeping to the user manual for reference when it is
necessary.
Contents
目录

[Function Introduction]

1.
Touch screen keypad GSM alarm system
2.
8 Wired defense zones and 100 wireless defense zones.
3.
At most 5 wireless remote control codes.
4.
Touch keypad， Built-in clock.，LCD display. Operate easily.
5.
Voice prompt for each operation.
6.
SMS prompt automatically about low power of battery.
7.
SMS prompt when AC power lost or recovered.
8.
Built-in intercom horn, two way communication can be realized.
9.
Built-in wireless transmitting module, could be coding with wireless siren.
10. Build-in wireless transmitter,can control 4 relay outputs with home
appliances,such as lights,garage door,television,curtain,etc.
11. 1 group timed Arm and timed Disarm function.
12. Can store 6 groups of phone numbers: when alarming, system will make
alarm call to these numbers automatically.
13. Can store 2 groups of SMS numbers: when alarming, system will send
alarming SMS to these numbers automatically.
14. Can store 2 alarm center telephones.
15. Inquire the status of alarm panel by SMS.
16. Delay alarming for each defense zone(0-99 seconds)
17. 10-second voice message recording can be played automatically when
alarming.
18. The host can be used as a hand-free phone. Users can make call by the
keypad for telephone fee inquiry and charging.
19. One-key-control function: Out Arm, Home Arm, Remote Arm.
20. Real-time, delay, 24 hours, bypass defense zones programming function.
21. Wireless coding: easy to add additional wireless accessories.
22. Remote control Arm, Disarm, Monitor, and Intercom by phone.
23. Event Log Query: host automatically records 40 pieces of all information
concerning arm, disarm and alarm events.
24. Multi-type of arm: Remote control arm, out arm, home arm, timed arm, arm
by phone.
25. Built-in AAA NI-MH rechargeable battery: make alarm when power off.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GS-G90E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lightinthebox GS-G90E

  • Page 1: Function Introduction

    Contents 目录 Preface] [Function Introduction] Touch screen keypad GSM alarm system Thank you for choosing the wireless alarm system product of our company. 8 Wired defense zones and 100 wireless defense zones. At most 5 wireless remote control codes. Wireless alarm system adopts the most advanced digital sensing and Touch keypad，...

  • Page 2: Alarm Host Diagram

    wire connecting terminal： [Alarm Host Diagram] The host shall be installed in the Centre of the prevent site which could realize best receiving effect from all wireless detectors. Please note that keep the host away from large-sized metallic objects and home appliances producing high-frequency interference;...

  • Page 3: System Setting

    [Function Setting] 4. Coding of Remote Controller Setting The remote controller has to be coded to the alarm host in order to perform 1. Initialization normally. Please insert SIM card and insert the adapter output terminal into the power hole of Press firstly, then input 4- digit password by the keypad on the host,and the host, and then power on the system.

  • Page 4: Coding Of Wireless Detector Setting

    LCD display: 6. Coding of Wireless Detector Setting Wireless detectors have to be coded to the host in order to trigger its alarm. Press firstly, then input 4- digit password by the keypad,and input instruction code [23], input the defense zone number you want to code [02~99],Press to confirm,The host emits a long beep and the corresponding defense zone is displayed on the screen.

  • Page 5: Wireless Equipment Coding Setting

    host to alarm. Password[47][82][1] Operating method: 4). Detector alarm type is set to “3”: This detector will trigger the host to alarm in LCD display: any status. Wireless detector alarm type setting Press firstly, then input 4- digit password by the keypad,input instruction code [26], and press the defense zone [02~99] and then input [0~3] about detector alarm type, finally press to confirm.

  • Page 6: Telephone Dial-Up Cycle Times Setting

    Example: detailed operating of 2 seconds delayed time arm. Operating method: Password[33][02] LCD display: 12.Siren Ring Time setting(Default:3 minutes) Press firstly, then input 4- digit password by the keypad,input instruction 14.Alarm Delayed Setting ； code [32] on the keypad, then enter time [00~15] minutes, finally press Alarm time delayed setting is that the host will not alarm until delayed The host make a long beep, You will hear a voice prompt “setting completed”.

  • Page 7: Password Change Setting

    Press firstly, then input 4- digit password by the keypad,input instruction 17. Voice Recording message Setting [35], then input dial-up cycle time [00~09] times, finally press to confirm. The host makes a long beep. You will hear a voice prompt “setting completed”. Pres s firstly, then input 4- digit password by the keypad,input Operating method:...
  • Page 8 should be entered. (Default:6666) 2. Change Administrator Password Example: Open the keypad lock. Administrator password is the key to enter the host system when need Operating: Password[40][1] function setting. LCD display: Press firstly, then input 4- digit password by the keypad,input instruction [39], and then input the 4- digit new password, and then press to confirm.

  • Page 9: Host Reset Setting

    21. Host Timed Arm /Disarm Setting Timed arm or disarm is convenient to arm or disarm at the necessary time. Press firstly, then input 4- digit password by the keypad,input instruction [42], and then input disarming time [AABB], and then input arming time [XXYY], 23.

  • Page 10: Sms Phone Number Setting

    Example: set the time as 17:30, June, 12th, 2012 25. Arm/ Disarm SMS alert Setting(Default: Will not send) Operating: Password [48][12][06][12][17][30] To ensure safety, alarm panel will (or not) send a SMS to user when arm/ LCD display: disarm Press firstly, then input 4- digit password by the keypad,input instruction [46].
  • Page 11 Password[XX] Operating: 30.Alarm call Number Delete Setting XX indicates: address code [49] ~ [50] of 1-2 group SMS phone number Example: Delete the first group of SMS phone number. Press firstly, then input 4- digit password by the keypad,input instruction Operating: [49]...

  • Page 12: Host Gsm Signal Checking

    3) Home Arm: Press [ 32. Host GSM Signal Checking 4) SOS: Press [ Press firstly, then input 4- digit password by the keypad,input instruction 3. Away Arm [62] and then press to confirm. The host makes a long beep, you will hear a voice prompt: “setting completed”.

  • Page 13: Answer Alarm Call

    Remote Control Operation: Just press [ number automatically. The system will call each preset numbers for 3 times in LCD display: order. If you answer the all, you will hear the pre-record voice message . You can set system via your telephone or mobile phone keypad. If you hang-up directly without answering the call, system will call each preset number for 3 times circularly.

  • Page 14: Maintenance

    Press [7]: Turn on the relay NO.2. (Press 7 again, turn it off). Press [8]: Turn on the relay NO.3. (Press 8 again, turn it off). Press [9]: Turn on the relay NO.4. (Press 9 again, turn it off). Press [*] : Play voice recording message. 9.
  • Page 15 Sensor detection: Technical Parameter 1). manually trigger the detector to check whether it sounds normal alarm. Adaptor power： DC12V 1000mA 2). Check batteries of all detectors to make sure whether it is under-voltage. 3). Check whether wireless detector is communicated with the host during Static consumption：...
  • Page 16 3. Administrator password system setup command table Data Factory Setting item Remark Keypad Lock Setting X=1 open, X=0 closed (XY) Default Coding of Remote X=1 open time setting function Host Timing Setting Controller X=0 close time setting function Remote Controller Host Arm or Disarm XXXX XXXX= arm time YYYY= disarm...

Table of Contents