Stand Installation
Your TV is packaged with the TV stand separated from the cabinet. To setup the TV table stand,
please carry out the installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged.
Note:
1. The panel is easy to scratch, so please choose an absolutely flat surface to place the
TV, and use soft cloth or cushion to protect the TV panel. Do not put TV on table directly.
2. Always unplug the AC cord first when installing or removing the stand.
Step Two
As per below illustration, insert the stand to the main TV. Adjust the screw hole to each other.
Step Three
After screwing (4*26PWM) the stand to TV, the TV is set up.
4-4*26PWM
25