Page 2
SAFETY General Safety Electrical Safety Please read these instructions before Connect the heater to a single 230 V, using the fan and keep for future 10A socket only. Do not plug into reference. double adaptors or multi-outlet power boards. This appliance is not intended for use by persons (including children) with Make sure that the heater never comes reduced physical, sensory or mental...
Page 3
SAFETY (CONT) Safety Device To avoid overheating problems the in- built safety device will interrupt electricity if the heating element becomes too hot. The heater will then return to stand-by mode. If this should happen: • Check that the heater is positioned correctly, not close to any furnishings.
Page 4
ASSEMBLY Component List Assembly Instructions Unpack the heater and make sure it is undamaged and all components are present. Your heater must be assembled for either the Portable or Wall Mounting option before use, and not be free standing. Portable Assembly: Turn the heater upside down and assemble the two leg supports by unscrewing and then re-...
Page 5
(screws and wall anchors) are not supplied and will need to be purchased from your local hardware retailer. Please use the following fixed weights as a guide:- Model CPH01B/W/M: 9.3 kg Model CPH02B/W/M: 12.6 kg There are 4 fixing points that must be Fix the wall bracket securely to the wall used.
ASSEMBLY cont. OPERATION Push the heater back onto the 2 top wall Heater operation bracket tabs, ensuring they ‘click’ into • Activate the heater for use by the rear panel slots (Fig 8). Tighten the pressing the “ON/OFF” remote isolate 2 screws to lock the bracket into place.
OPERATION cont. MAINTENANCE • Press the “MODE” button on the unit To maximise the efficiency of the heater, or remote control to select “AUTO” clean the inlet and outlet grilles setting. regularly. • Select the temperature setting you • Unplug the heater from the mains want by pressing the “TEMP”...
WARRANTY In this warranty: means Seeley International Pty Ltd ABN 23 054 687 035, and our contact details are set out at the end of this warranty; means you, the original end-user purchaser of the Goods; Supplier means the authorised distributor or retailer of the Goods that sold you the Goods in Australia;...
Page 9
WARRANTY cont. 4. No other person, firm or corporation is authorised by us to offer or give on our behalf any other or greater warranty than that given under this warranty. The benefits conferred by this warranty are in favour of You and any person deriving title to the goods through or under such person and are intended to be separate from and additional to all other rights and remedies that they may have in law in respect of the goods.
Page 10
For technical assistance before returning the product please contact: 1300 650 399 Please retain your receipt as proof of purchase. Every request for warranty must be accompanied by proof of purchase. Complete the following for your records: Serial Number: Product Convair Prestigio Model CPH01B CPH01W CPH01M CPH02B CPH02W...
Page 11
Waste electrical products must not be disposed of with household waste. This product should be taken to your local recycling centre for safe treatment. As the policy of this company is one of continuous improvement, all specifications are subject to change without notice. SEELEY INTERNATIONAL –...
Page 12
It is the policy of Seeley International to introduce continual product improvement. Accordingly, specifications are subject to change without notice. Please consult with your dealer to confirm the specifications of the model selected. Warranty Service Australia 1-300-650-399 seeleyinternational.com ® convair.net.au 00144901-B AU 1111...
Need help?
Do you have a question about the CPH01B and is the answer not in the manual?
Questions and answers