Cadillac CTS 2015 Owner's Manual page 215

Cadillac CTS Owner Manual (GMNA-Localizing-MidEast-8087697) - 2015 -
crc - 6/17/14
See Traction Control/Electronic
Stability Control on page 9-27. If a
collision alert occurs when cruise
control is activated, cruise control is
disengaged. See Forward Collision
Alert (FCA) System on page 9-48.
When road conditions allow the
cruise control to be safely used,
cruise control can be turned
back on.
If the brakes are applied, the cruise
control disengages.
J
(On/Off): Press to turn the
system on and off. A white indicator
appears in the instrument cluster
when cruise is turned on.
+RES (Resume/Accelerate): If
there is a set speed in memory,
press the control up briefly to
resume to that speed or press and
hold to accelerate. If the cruise
control is already active, use to
increase vehicle speed. To increase
speed by 1 km/h (1 mph), press
+RES up to the first detent. To
increase speed to the next 5 km/h
(5 mph) mark on the speedometer,
press +RES up to the second
detent.
SET (Set/Coast): Press the
control down briefly to SET to set
the speed and activate cruise
control. If cruise control is already
active, use to decrease vehicle
speed. To decrease speed by
1 km/h (1 mph), press SET down to
the first detent. To decrease speed
Black plate (31,1)
Driving and Operating
to the next 5 km/h (5 mph) mark on
the speedometer, press SET down
to the second detent.
(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
J
If the button is on when not in
use, SET or +RES could get
pressed and go into cruise when not
J
desired. Keep the button off
when cruise is not being used.
J
1. Press .
2. Get up to the desired speed.
3. Press and release SET .
4. Remove foot from the
accelerator.
When the cruise control has been
set to the desired speed, a green
cruise control indicator appears on
the instrument cluster and a cruise
set speed message appears on the
Head-Up Display (HUD),
if equipped.
9-31