Maintenance Instructions - Ezgo PowerWise QE User Manual

MAINTENANCE INSTRUCTIONS

1. For flooded lead-acid batteries, regularly check
water levels of each battery cell after charging and
add distilled water as required to level specified by
battery manufacturer. Follow the safety instructions
recommended by the battery manufacturer.
2. Make sure charger connections to battery terminals
are tight and clean. Check for deformation/cracks in
plastic parts. Check the charger harness for chaffing
and rubbing. Inspect all wiring for fraying, loose ter-
minals, chaffing, corrosion or deterioration of insula-
tion.
3. Keep cooling fins free of contamination and do not
expose charger to oil, dirt, mud or to direct heavy
water spraying when cleaning equipment.
Introducing the
PowerWise
E-Z-GO Division of Textron, Inc., 1451 Marvin Griffin Road, Augusta, Georgia
USA 30906-3852 Phone: 1-800-241-5855
QE
™
Page 4.
48 Volt Battery Charger
710-0035 Rev1