Page 1
P O R T A B L E T O W E R F A N OWNER’S INSTRUCTION MANUAL MODEL CTF01...
Page 2
Waste electrical products must not be disposed of with household waste. This product should be taken to your local recycling centre for safe treatment. As the policy of this company is one of continuous improvement, all specifications are subject to change without notice.
SAFETY Make sure that the fan never comes into GENERAL SAFETY contact with water. Please read these instructions before using the fan and keep for future reference. Never turn the fan on if the lead is damaged or if the fan’s casing is obviously damaged. This appliance is not intended for use by In order to avoid a hazard, the power cord persons (including children) with reduced...
ASSEMBLY COMPONENT LIST ASSEMBLY Unpack the fan and check that you have all of the components. Remove the screws from the base. Assemble the front and rear base stand onto the fan, pulling the cable through the central hole between them. Screw the base stand into position and feed the cord through the retention slots (Fig 2).
OPERATION - MAINTENANCE OPERATION MAINTENANCE Insert the plug into the power outlet. To maximise the efficiency of the fan, clean the inlet and outlet grilles regularly. Select the desired fan speed by rotating the • Unplug the fan from the mains power control knob to the desired selection.
Page 8
It is the policy of Seeley International to introduce continual product improvement. Accordingly, specifications are subject to change without notice. Please consult with your dealer to confirm the specifications of the model selected. Service Australia 1-300-650-399 seeleyinternational.com seeleyinternational.com 00136401-B AU 1112...
Need help?
Do you have a question about the CTF01 and is the answer not in the manual?
Questions and answers