Advertisement
Quick Links
Advertisement
Summary of Contents for Noga WaterCare NW 4360
-
Page 1: Installation Instructions
Installation Instructions Product Code: NW 4360 Instalation Schematic... - Page 2 Installation Instructions Reverse Osmosis Filter Unit Fitting This system is supplied pre-assembled and will need only 4 connections made. Before the system can be fully installed it is necessary to flush out the 3 vertical filters to remove any debris. Remove ¼”...
- Page 3 Installation Instructions CAUTION: The water supply to your system must be the cold mains and have a minimum pressure of 1.5 bar. Hot water will severly damage your system. Filter Flushing Turn the water on at the mains and open the swan neck tap. All of the air is expelled and the water will begin to flow.
- Page 4 Water may seem to be cloudy or milky for the first week or so after installation, this is quite normal, as this is air bubbles, and will settle after the first few charges of your system. You are now ready to enjoy the purest water you can drink courtesy of your Noga Watercare reverse osmosis. WARNING:...