Honda 1993 Civic Reference Owner's Manual page 24

Child Safety
Then install the tether hardware
that came with the child seat.
Tighten the bolt to:
22 N·m(2.2 kg-m,16 Ib-ft)
If you are not sure how to install
the bracket, have it installed by
your Honda dealer.
If you need an anchor plate and
mounting hardware, you can obtain
them by writing to:
American Honda Motor Co., Inc.
Consumer Affairs
1919 Torrance Blvd.
Torrance, CA 90501-2746
Driver and Passenger Safety
Canadian Cars
TOOTHED WASHER
The anchor plate and mounting
hardware for a top tether are
supplied with the car. When
installing, make sure the toothed
washer is on the bottom of the bolt.
The supplied anchor plate is
designed only for mounting a child
restraint. Do not use it for any
other purpose.
Storing a Child Seat
When you are not using an infant
seat or other child restraint, either
remove it or make sure it is
properly secured so it cannot be
thrown around the car during a
crash.