Advanced Functions - Atek Stagehand RM200 User Manual

Operation

ADVANCED FUNCTIONS

White screen (W command)
When in slide show view, push and hold the function button, and without releasing,
push the LED illumination light button within two seconds.
If you do not push the LED illumination light button within two seconds, you will invoke
the black screen function instead.
To return to the slide show, repeat the same procedure, or simply push and release the
up or down button.
Toggle window (Alt-Tab command)
To toggle among open slide shows and applications, push and hold the function button,
and without releasing, push the laser pointer button within two seconds (otherwise you
will invoke the black screen function instead).
While continuing to hold the function button, release the laser pointer button and then
push it again to move from one window selection to the next.
Disable laser pointer
Push and hold the laser button, and without releasing, push and hold the function
button for more than two seconds until the LED illumination light flashes three times
to confirm the change.
To re-enable the laser pointer, repeat the same procedure.
Stagehand User's Manual, page 10