Wave Olympia Info Globe OL3000 Manual page 7

Note:
For records that have a total number of characters and digits exceeding that, which can be
stored, part of the message will be truncated.
Pressing the UP key, displays the previous record in the Caller ID list. At the beginning
of the Caller ID List, pressing the UP key will go to the last selection.
Pressing the DOWN key displays the next record in the Caller ID list. At the end of the
Caller ID List, pressing the DOWN key will go to the top of the list.
Pressing RIGHT key once will delete the current displayed record
Pressing and holding the RIGHT key for 2 seconds during Caller ID browsing, the
following will be displayed:
Pressing the RIGHT key again will delete all CID records.
If the RIGHT key is not pressed for 10 seconds the Info Globe will go back to the
Caller ID list view.
SETTING TIMER ON/OFF
The unit can be programmed to turn on and off at a set time, e.g. turned off at 10:30pm
and turned on at 6:00am.
1. Press SELECT key to enter the menu.
2. Select SET ON/OFF TIME . The current setting will be shown, e.g.
3. The hour setting HH for the ON time will be blinking. Use the UP and DOWN keys
to select the hour.
4. Use the RIGHT key to move to the minute location MM.
5. Use the UP and DOWN keys to select the minutes.
6. Use the RIGHT key to move to the time format location TT. This is to set AM or PM.
If the 24- hour clock format has been chosen (see section on 'Setting Time Mode') the
TT will not be displayed.
Use the RIGHT key to move to the locations for setting the timer off time in the same
way.
7. Confirm the setting by pressing SELECT.
Note: Caller ID information will not be received when the unit is off.