Advertisement
Quick Links
Advertisement
Summary of Contents for D3 Media 4x4pro
- Page 1 4x4pro VFC Installation Guide...
- Page 2 The d3 4x4pro ships standard with 4x DisplayPort 1.2 outputs, giving you 4x4K outputs plus an extra output for your control GUI. Quad-DVI and Quad-SDI cards are available as accessories, allowing you to change cards as your production demands it.
- Page 3 Changing VFC cards Please note: Take steps to ensure you are free of static electricity before starting the procedure and ground yourself appropriately. We recommend the use of an anti static wrist strap as well as an anti-static mat if one is available. Users can change VFC cards as they require.
- Page 4 Changing VFC cards Step 3: Lift the latch on the top right corner of the card and gentlly remove the card from the rear of the unit by pulling gently as shown in the images below. Please Note: The VFC cards are fragile, be sure to pull straight not flexing the card and if under any resistance do not to use excessive force.
- Page 5 Changing VFC cards Step 4: Gently place the removed card into the anti static box provided with your purchase. Step 5: Gently insert the new VFC card into the vacant slot, being careful to line the card up with the black plastic guides both at the top and the bottom of the system, as indicated for the bottom with red lines in the image below.
- Page 6 Changing VFC cards Step 5: Once inserted into the guides make sure the card is fully flush with the rear of the server by gently and firmly pressing in the centre of the VFC card, as indicated in the image below. Step 6: Replace the four retaining screws before repeating steps 1-3 for next the card.
-
Page 7: General Information
General information VFC cards are currently only available for the d3 4x4pro. Should you have questions or issues with this product, contact d3 Technologies’ Support department for assistance. Only certified technicians should attempt to repair components. Do not try to force the cards if they do not go in or out easily, instead, contact d3 Support for assistance. - Page 8 Support Helpful contacts Support Team support@d3technologies.com Training Team training@d3technologies.com Sales Team sales@d3technologies.com Helpful resources Hardware Manual pro.d3technologies.com User Guide r12.d3technologies.com Video Tutorials tutorials.d3technologies.com Helpful weblinks d3 Trial d3technologies.com/contact/enquiry d3 Software Updates download.d3technologies.com d3 Webshop store.d3technologies.com Regional: EMEA Sales Manager Sarah Cox +44 207 234 9840 Americas Sales Manager Hans Beijer...