Advertisement
1. Warning
Every person involved with the installation , operation and maintenance of this device has to be
Experienced or qualified .
Users must follow the instructions of this manual
Unqualified person can not open the housing cover and operate the device , or the dealer will not accept
liability for any resulting defects or problems. There are no user servicable parts inside the light.
Protect the device against rain and moisture, it is for INSIDE use only
2. Warning notes :
Power supply : AC 100V-240V , 50/60Hz auto sensing
Make sure the power switch is off , the power plug , outlet and the earth connection is in good
condition before connecting the device with the mains.
During moving and installation , make sure the device is not damaged against metal parts and other
tough materials.
The minimum distance between light-output and the illuminated surface must be more than 50cm
The device must only be installed on a non-flammable surface. In order to safeguard sufficient ventilation,
leave 50cm of free space around the device . Please note that heat-sensitive objects may be deformed or
damaged by the emitted heat.
During operation the housing becomes very hot ! Do not operate the device for 15 minutes after switching off .
The maximum ambient temperature Ta = 45
° C
temperature Tb=80
For indoor use
Replace any visible cracked protective shield , filters and lens .
The protective shield, filters and lens will require weekly cleaning as smoke fluid tends to building up
residues reducing the light output very quickly.
SAFETY WARNING
°
must never be exceeded .
C must never be exceeded , The maximum housing
Unit C4 Rhombus Park
Diamond Road
Norwich
Norfolk NR6 6NN
Tel: 01603 401982
Advertisement
